Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: Case study for partially stabilized zirconia

In recent years it has been observed that the substrate surface temperature during thermal spray deposition has a profound effect on the morphology of the impacted droplet (splat) and consequently on the microstructure and properties of the deposits. In this set of two papers (one for metal and one for ceramic), the substrate temperature effects have been studied in an integrated manner relating the initial splat formation to microstructure development and eventually to the properties of the deposit. Isolated impacted splats have been obtained on polished steel substrates at two different temperatures (high and low) and these have been analyzed quantitatively for their shape factors and thicknesses. The deposits have been formed nominally at these two different temperatures and their microstructures and properties have been analyzed. The results confirm that there exists a threshold transition temperature for the substrate surface beyond which the splat morphology changes from a fragmented (splashed) to a more contiguous (disk-shaped) morphology. In the case of zirconia this temperature appears to be in the range of about 250-300 degrees C, which is roughly 10% of the melting temperature of zirconia. It has been further observed that the splat-substrate and inter-splat contact is significantly improved at higher temperatures, leading to reduced porosity, increased thermal conductivity and strength. These results are assimilated to develop an integrated structure-property relationship and preliminary arguments are presented as to the reason for such transitions. (C) 1999 Elsevier Science S.A. All rights reserved.