THE EFFECT OF THERMAL EXPOSURE ON THE MICROSTRUCTURES AND PROPERTIES OF RENE-80 SUPERALLOY

被引：0
作者：
Farahany, Saeed [1 ]
Aghaie-Khafri, Mehrdad [1 ]
机构：
[1] KN Toosi Univ Technol, Fac Mech Engn, Tehran, Iran
来源：
TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES | 2009年
关键词：
Life assessment; Superalloy; Rene-80;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Ni-base superalloy Rene-80 is widely used in manufactring of the first stage blades of gas turbine engines. The influence of continuous annealing at 850 degrees C for 100, 500, 750 and 1000 hr on microstructure, hardness, stress-rupture and mechanical properties have been investigated. Test specimens for creep tests were prepared from the heat treated and annealed materials according to the ASTM-E139. Creep behaviors are generally determined by means of a test in which a constant uniaxial load and temperature, 190MPa and 982 degrees C according to GE standard. As a result, microstructural investigation by means of optical and scanning electron microscopy showed the gamma' particles have been spheroidized and coarsened according to LSW theory. Also this phenomenon caused to diminish hardness, creep strength and creep life time.
引用
收藏
页码：315 / 322
页数：8
相关论文
共 50 条
[41]   Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene'41 by laser melting deposition manufacturing [J].
Li, J. ;
Wang, H. M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19) :4823-4829
[42]   Effect of thermal spray coating cermets on superalloy to combat hot corrosion [J].
Mysore Sadashiva, Vinod Kumar ;
Ramappa, Suresh ;
Natarajan, Jagadeeswaran ;
Nisana Siddegowda, Prema ;
Naik, Prem Kumar ;
Puttaswamy, Madhusudan .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2023, 74 (07) :1048-1057
[43]   Effects of phosphorus and boron on the γ " precipitate evolution and creep properties of IN718 superalloy during long-term thermal exposure at 680 °C [J].
Wang, Zhiyuan ;
Xue, Chaochao ;
Liu, Yingjie ;
Xin, Xin ;
Sun, Wenru .
JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 995
[44]   Effect of electroless nickel plating on high temperature oxidation behavior of carbon nanotube reinforced Rene104 superalloy composites [J].
Wei, Bing ;
Liu, Zuming ;
Ai, Yongkang ;
Cao, Bin ;
Ye, Shupeng ;
Li, Jian ;
Zhou, Huan .
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 903
[45]   Correlation between microstructures and mechanical properties of a SLM Ni-based superalloy after different post processes [J].
Yang, X. G. ;
Li, B. ;
Wang, M. L. ;
Guo, S. Q. ;
Miao, G. L. ;
Shi, D. Q. ;
Fan, Y. S. .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 32 :955-966
[46]   Recrystallization and its influence on microstructures and mechanical properties of laser solid formed nickel base superalloy Inconel 718 [J].
Fencheng Liu ;
Xin Lin ;
Gaolin Yang ;
Menghua Song ;
Jing Chen ;
Weidong Huang .
Rare Metals, 2011, 30 :433-438
[47]   Recrystallization and its influence on microstructures and mechanical properties of laser solid formed nickel base superalloy Inconel 718 [J].
Liu Fencheng ;
Lin Xin ;
Yang Gaolin ;
Song Menghua ;
Chen Jing ;
Huang Weidong .
RARE METALS, 2011, 30 :433-438
[48]   On the precipitation hardening of the directionally solidified GTD-111 Ni-base superalloy: Microstructures and mechanical properties [J].
Dadkhah, Arman ;
Kermanpur, Ahmad .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 685 :79-86
[49]   The effect of composition on microstructure and properties for additively manufactured superalloy 718 [J].
Smith, Timothy M. ;
Gabb, Timothy P. ;
Kantzos, Christopher A. ;
Thompson, Aaron C. ;
Sudbrack, Chantal K. ;
West, Brian ;
Ellis, David L. ;
Bowman, Cheryl L. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 873 (873)
[50]   Effect of the δ Phase on the Tensile Properties of a Nickel-Based Superalloy [J].
Zhu, Qiang ;
Gang, Chen ;
Wang, Chuanjie ;
Cheng, Lukuan ;
Qin, Heyong ;
Zhang, Peng .
METALS, 2019, 9 (11)
12345