THE EFFECT OF THERMAL EXPOSURE ON THE MICROSTRUCTURES AND PROPERTIES OF RENE-80 SUPERALLOY

被引：0
|
作者：
Farahany, Saeed [1 ]
Aghaie-Khafri, Mehrdad [1 ]
机构：
[1] KN Toosi Univ Technol, Fac Mech Engn, Tehran, Iran
来源：
TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES | 2009年
关键词：
Life assessment; Superalloy; Rene-80;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Ni-base superalloy Rene-80 is widely used in manufactring of the first stage blades of gas turbine engines. The influence of continuous annealing at 850 degrees C for 100, 500, 750 and 1000 hr on microstructure, hardness, stress-rupture and mechanical properties have been investigated. Test specimens for creep tests were prepared from the heat treated and annealed materials according to the ASTM-E139. Creep behaviors are generally determined by means of a test in which a constant uniaxial load and temperature, 190MPa and 982 degrees C according to GE standard. As a result, microstructural investigation by means of optical and scanning electron microscopy showed the gamma' particles have been spheroidized and coarsened according to LSW theory. Also this phenomenon caused to diminish hardness, creep strength and creep life time.
引用
收藏
页码：315 / 322
页数：8
相关论文
共 50 条
  • [1] MICROSTRUCTURES AND CRYSTALLOGRAPHIC RELATIONSHIPS IN ALUMINIZED COATINGS ON RENE-80
    SHEN, P
    GAN, D
    LIN, CC
    MATERIALS SCIENCE AND ENGINEERING, 1986, 78 (02): : 171 - 178
  • [2] On the heat treatment of Rene-80 nickel-base superalloy
    Safari, J.
    Nategh, S.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 176 (1-3) : 240 - 250
  • [3] MICROSTRUCTURES OF A 1ST-STAGE ALUMINIZED COATING ON RENE-80
    SHEN, P
    TSAI, MJ
    GAN, D
    MATERIALS SCIENCE AND ENGINEERING, 1986, 82 (1-2): : 197 - 202
  • [4] LOW-CYCLE FATIGUE OF RENE-80 AS AFFECTED BY PRIOR EXPOSURE
    ANTOLOVICH, SD
    DOMAS, P
    STRUDEL, JL
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1979, 10 (12): : 1859 - 1868
  • [5] The effect of oxide scale and microstructural changes during cyclic hot corrosion on high-temperature tensile properties of Rene-80 superalloy
    Rabieifar, Arman
    Afshar, M. Reza
    Najafi, Hamidreza
    MATERIALS AT HIGH TEMPERATURES, 2024, 41 (03) : 357 - 371
  • [6] Influence of thermal exposure on the microstructures and mechanical properties of a superalloy
    Hou, JS
    Guo, JT
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2006, 15 (01) : 67 - 75
  • [7] Influence of thermal exposure on the microstructures and mechanical properties of a superalloy
    J. S. Hou
    J. T. Guo
    Journal of Materials Engineering and Performance, 2006, 15 : 67 - 75
  • [8] Microstructures and cyclic oxidation behaviour of Pt-free and low-Pt NiAl coatings on the Ni-base superalloy Rene-80
    Shirvani, K.
    Firouzi, S.
    Rashidghamat, A.
    CORROSION SCIENCE, 2012, 55 : 378 - 384
  • [9] The evaluation of oxide scale formation during hot corrosion of Rene-80 superalloy under thermal shock at different dwell times
    Rabieifar, Arman
    Afshar, M. Reza
    Najafi, Hamidreza
    Nategh, Said
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2022, 57 (01) : 55 - 65
  • [10] Effect of Protective Coating Layer and Overlapping Factor on the Microstructure and Mechanical Properties of Rene-80 Ni-Based Superalloy in Laser Shock Peening Process
    Khanigi, Alireza Fayazi
    Shahverdi, Hamidreza
    Farnia, Amirreza
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
12345