Prediction and measurement of residual stresses and distortions in fibre laser welded Ti-6Al-4V considering phase transformation

被引：127

作者：

Ahn, J. ^{[1
]}

He, E. ^{[2
]}

Chen, L. ^{[2
]}

Wimpory, R. C. ^{[3
]}

Dear, J. P. ^{[1
]}

Davies, C. M. ^{[1
]}

机构：

[1] Imperial Coll London, Dept Mech Engn, South Kensington Campus, London SW7 2AZ, England

[2] Beijing Aeronaut Mfg Technol Res Inst, Sci & Technol Power Beam Lab, Beijing, Peoples R China

[3] Helmholtz Zentrum Berlin, Hahn Meitner Pl 1, D-14109 Berlin, Germany

来源：

MATERIALS & DESIGN | 2017年 / 115卷

基金：

英国工程与自然科学研究理事会;

关键词：

Residual stress; Ti-6Al-4V; Fibre laser welding; Numerical simulation; Phase transformation; Neutron diffraction; HEAT-AFFECTED ZONE; TITANIUM-ALLOYS; ALPHA-PHASE; MICROSTRUCTURAL EVOLUTION; MECHANICAL-PROPERTIES; BETA-PHASE; KINETICS; STEEL; SIMULATION; BUILDS;

D O I：

10.1016/j.matdes.2016.11.078

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Residual stresses and distortions due to time dependent and localised heating imposed during fibre laserwelding a 2.0 mm thick titanium alloy Ti-6Al-4V sheet were studied. Sequentially coupled thermo-metallurgical-mechanical simulations were performed to predict welding induced residual stresses and distortion in the fibre laser weld sample, and validated using an experimental database including weld pool geometry and temperature fields. Residual stress measurements were taken using X-ray and neutron diffraction techniques and distortion measurements were recorded using a coordinate measuring machine (CMM). The influence of thermally driven non-isothermal diffusional and diffusionless solid state phase transformations on welding residual stresses and distortions were considered in the numerical model. An internal state variables approach was used to represent the transformed volume fraction of different microstructural phases as a function of cooling rate and peak temperature, and the volumetric change due to temperature variations and phase transformations were calculated. In addition, post weld heat treatment (PWHT) as a method for reducing residual stresses was examined. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：441 / 457

页数：17

共 46 条

[31]

Lorentzen T., 2005, INTROD CHARACT RESID, P25

[32]

Lorentzen T., 2005, DIFFRACTION TECHNIQU, P67

[33] Differential scanning calorimetry study and computer modeling of β ⇒ α phase transformation in a Ti-6Al-4V alloy [J].

Malinov, S ;

Guo, Z ;

Sha, W ;

Wilson, A .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (04) :879-887

[34] Resistivity study and computer modelling of the isothermal transformation kinetics of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.08Si alloys [J].

Malinov, S ;

Markovsky, P ;

Sha, W ;

Guo, Z .

JOURNAL OF ALLOYS AND COMPOUNDS, 2001, 314 (1-2) :181-192

[35]

Mills K.C., 2002, THERMOPHYSICAL PROPE, DOI DOI 10.1533/9781845690144

[36] Influence of tempering temperature and time on the alpha'-Ti-6Al-4V martensite [J].

Mur, FXG ;

Rodriguez, D ;

Planell, JA .

JOURNAL OF ALLOYS AND COMPOUNDS, 1996, 234 (02) :287-289

[37] A model for Ti-6Al-4V microstructure evolution for arbitrary temperature changes [J].

Murgau, C. Charles ;

Pederson, R. ;

Lindgren, L. E. .

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2012, 20 (05)

[38] EFFECTS OF A STRESS RELIEF HEAT-TREATMENT ON THE TOUGHNESS OF PRESSURE-VESSEL QUALITY STEELS - INFLUENCE OF THE PLATE THICKNESS [J].

PROVOST, W .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1982, 10 (02) :93-118

[39] Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti-6Al-4V, 304L stainless steel and vanadium [J].

Rai, R. ;

Elmer, J. W. ;

Palmer, T. A. ;

DebRoy, T. .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2007, 40 (18) :5753-5766

[40] Literature review of heat treatment simulations with respect to phase transformation, residual stresses and distortion [J].

Rohde, U ;

Jeppsson, A .

SCANDINAVIAN JOURNAL OF METALLURGY, 2000, 29 (02) :47-62

← 1 2 3 4 5 →