The functional aqueous slurry coated separator using polyvinylidene fluoride powder particles for Lithium-ion batteries

To improve the performance of lithium-ion batteries, the functional separators were developed by coating water based polyvinylidene fluoride (PVDF) powder particles solution using polyvinyl alcohol as the binder on both sides of a conventional polypropylene (PP) microporous membrane by means of simple dipping. The electrochemical performance was tested and compared with that of pure PP membrane. It was found that the PVDF powder particles accumulated and scattered on the surface of PP membrane. Many voids existed among the powder particles. The thermal shrinkage percent tested at 130 degrees C for 1 h was decreased from 59.4% to 12.7%, whereas the electrolyte uptake was increased from 80% to 140%. The separator coated With 10% solid content of PVDF particles exhibited the best electrochemical performance, including the cycling performance and rate capability. The coated PVDF component not only decreased the interface resistance but also increased the ionic conductivity, owing to the high strong affinity of PVDF toward polar solvents and the voids among the PVDF particles to afford the passage for Li-ions. (C) 2017 Elsevier B.V. All rights reserved.