Joinability of aluminium alloy and mild steel sheets by self piercing rivet

被引：141
|
作者：
Abe, Y.
Kato, T.
Mori, K.
机构：
[1] Toyohashi Univ Technol, Fac Engn, Dept Prod Syst Engn, Toyohashi, Aichi 4418580, Japan
[2] Nippon POP Rivets & Fasteners Ltd, Test Lab Grp Engn Dept 1, Toyohashi, Aichi 4418540, Japan
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2006年 / 177卷 / 1-3期
关键词：
finite element simulation; joining; rivet; self piercing rivet; aluminium alloy sheet; steel sheet;
D O I：
10.1016/j.jmatprotec.2006.04.029
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The joinability of aluminium alloy and mild steel sheets using a self piercing rivet is evaluated by a finite element simulation and experiment. The self piercing riveting has potential as a replacement for spot resistance welding generally used for steel sheets, because it is not easy to apply resistance welding to joining of aluminium and steel sheets which have very different melting points. Defects in the riveting are categorized into the penetration through the lower sheet, the necking of the lower sheet and the separation of sheets to obtain optimum joining conditions. The penetration, necking and separation are caused by the small total thickness, the small thickness of lower sheet and the large total thickness, respectively. The joinability for the combination of the upper sheet of steel and the lower sheet of aluminium is higher than that of the reverse combination. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：417 / 421
页数：5
相关论文
共 50 条
  • [1] Plastic joining of ultra high strength steel and aluminium alloy sheets by self piercing rivet
    Mori, K.
    Kato, T.
    Abe, Y.
    Ravshanbek, Y.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 283 - 286
  • [2] Self-piercing riveting of high tensile strength steel and aluminium alloy sheets using conventional rivet and die
    Abe, Y.
    Kato, T.
    Mori, K.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) : 3914 - 3922
  • [3] Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets
    Kim, W. Y.
    Kim, D. B.
    Park, J. G.
    Kim, D. H.
    Kim, K. H.
    Lee, I. H.
    Cho, H. Y.
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2014, 38 (07) : 735 - 742
  • [4] Self-Pierce Riveting of Three Aluminium Alloy and Mild Steel Sheets
    Mori, K.
    Abe, Y.
    Kato, T.
    Sakai, S.
    NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 673 - +
  • [5] Effect of galvanic corrosion on durability of aluminium/steel self-piercing rivet joints
    Calabrese, L.
    Proverbio, E.
    Pollicino, E.
    Galtieri, G.
    Borsellino, C.
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2015, 50 (01) : 10 - 17
  • [6] Distortion analysis for self-piercing riveting of aluminium alloy sheets
    Huang, H.
    Du, D.
    Chang, B. H.
    Sui, B.
    Chen, Q.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (01) : 73 - 78
  • [7] Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets
    Han, L.
    Chrysanthou, A.
    Young, K. W.
    O'Sullivan, J. M.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (08) : 646 - 654
  • [8] Fatigue properties of self-piercing riveted multi-rivet joints in steel and aluminum sheets
    Du, G.
    Xing, Y.
    Li, X.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2019, 50 (12) : 1495 - 1502
  • [9] Design of Helical Self-Piercing Rivet for Joints in Variable Sheets
    Park, Myung Soo
    Lim, Jae Bum
    Cho, Hae Young
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2018, 42 (04) : 347 - 352
  • [10] Joining of aluminium alloy and mild steel sheets using mechanical clinching
    Abe, Y.
    Kato, T.
    Mori, K.
    PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 1043 - +
12345