WRENCH CAPABILITY ANALYSIS OF CABLE-DRIVEN PARALLEL MECHANISMS

被引：0
|
作者：
Zou, Yu [1 ]
Zhang, Yuru [1 ]
机构：
[1] Beihang Univ, Inst Robot, State Key Lab Virtual Real Technol & Syst, Beijing 100191, Peoples R China
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE - 2011, VOL 6, PTS A AND B | 2012年
关键词：
MANIPULATORS;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The maximum wrench capabilities of the cable-driven parallel mechanisms are investigated in this paper Focusing on accuracy and efficiency, two methods, an optimization-based method and a hybrid method based on optimization and geometry, are presented for determining the wrench capability of the cable-driven parallel mechanisms. Both methods are applied to a 6-DOF cable-driven parallel mechanism with eight cables to compute the maximum isotropic force and maximum isotropic moment. Comparison of the two methods is made. The results show that the hybrid method proposed is more accurate and computationally efficient.
引用
收藏
页码：1273 / 1282
页数：10
相关论文
共 50 条
  • [1] Analysis of the wrench-closure workspace of planar parallel cable-driven mechanisms
    Gouttefarde, Marc
    Gosselin, Clement M.
    IEEE TRANSACTIONS ON ROBOTICS, 2006, 22 (03) : 434 - 445
  • [2] WRENCH CAPABILITY ANALYSIS OF A PLANAR DUAL-PLATFORM CABLE-DRIVEN PARALLEL ROBOT
    Rasheed, Tahir
    Long, Philip
    Padir, Taskin
    Caro, Stephane
    PROCEEDINGS OF ASME 2023 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2023, VOL 8, 2023,
  • [3] ON THE BOUNDARIES OF THE WRENCH-CLOSURE WORKSPACE OF PLANAR PARALLEL CABLE-DRIVEN MECHANISMS
    Azizian, K.
    Cardou, P.
    Moore, B.
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE 2010, VOL 2, PTS A AND B, 2010, : 203 - 212
  • [4] Tension analysis of cable-driven parallel mechanisms
    Pham, CB
    Yeo, SH
    Yang, GL
    2005 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS, VOLS 1-4, 2005, : 2601 - 2606
  • [5] Dynamic analysis of cable-driven parallel mechanisms
    Pham, CB
    Yang, GL
    Yeo, SH
    2005 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS, VOLS 1 AND 2, 2005, : 612 - 617
  • [6] Wrench and Twist Capability Analysis for Cable-Driven Parallel Robots With Consideration of the Actuator Torque-Speed Relationship
    Chan, Arthur Ngo Foon
    Lau, Darwin
    Lam, Sabrina Wai Yi
    IEEE TRANSACTIONS ON ROBOTICS, 2023, 39 (04) : 3185 - 3199
  • [7] CONTROLLABLE WORKSPACE OF CABLE-DRIVEN REDUNDANT PARALLEL MANIPULATORS BY FUNDAMENTAL WRENCH ANALYSIS
    Loloei, Azadeh Zarif
    Taghirad, Hamid D.
    TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2012, 36 (03) : 297 - 313
  • [8] Wrench-Closure Condition of Cable-Driven Parallel Manipulators
    Luan, Phan Gia
    Thinh, Nguyen Truong
    APPLIED SCIENCES-BASEL, 2021, 11 (09):
  • [9] Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms
    Gouttefarde, M.
    Merlet, J-P.
    Daney, D.
    ADVANCES IN ROBOT KINEMATICS: MECHANISMS AND MOTION, 2006, : 315 - +
  • [10] Wrench-based analysis of cable-driven robots
    Bosscher, P
    Ebert-Uphoff, I
    2004 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1- 5, PROCEEDINGS, 2004, : 4950 - 4955
12345