Reforming of CO2-containing natural gas with steam in AC gliding arc discharge for hydrogen production

In this study, a low-temperature gliding arc discharge system was used to investigate the effects of steam content and operational parameters, i.e. total feed flow rate, applied voltage, and input frequency, on the reforming performance of CO2-containing natural gas. The addition of steam less than 10% was found to enhance both selectivities for hydrogen and carbon monoxide with a significant reduction of power consumptions. The highest hydrogen selectivity and yield with the lowest power consumptions were achieved at a steam content of 10mol%, a total feed flow rate of 100cm(3)/min (corresponding to a very short residence time of 1.37s), an applied voltage of 13.5kV and an input frequency of 300Hz. Under these optimum conditions, the oxidative dehydrogenation reactions to produce hydrogen were dominant with the minimum activities of all undesired reactions of cracking and coupling. Both of the short residence time (1.37s) with a low bulk temperature (lower than 200 degrees C) in the plasma zone under atmospheric pressure, indicate that the studied plasma reactor (gliding arc system) is superior to conventional catalytic reactors for reforming of natural gas.