MICROSTRUCTURE ANALYSIS OF EQUIATOMIC MULTI-COMPONENT Ni20Ti20Ta20Co20Cu20 ALLOY

被引：4
|
作者：
Glowka, K. [1 ]
Zubko, M. [1 ,2 ]
Swiec, P. [1 ]
Prusik, K. [1 ]
Dercz, G. [1 ]
Stroz, D. [1 ]
机构：
[1] Univ Silesia Katowice, Inst Mat Sci, 75 Pulku Piechoty 1A, PL-41500 Chorzow, Poland
[2] Univ Hradec Kralove, Dept Phys, Hradec Kralove, Czech Republic
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2019年 / 64卷 / 02期
关键词：
Thermodynamics; High Entropy Alloys; Multi-component alloys; electron microscopy; microstructure; HIGH-ENTROPY ALLOYS; SOLID-SOLUTION; PHASE; TI; PREDICTION; STABILITY; DESIGN;
D O I：
10.24425/amm.2019.127614
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
An equiatomic multi-component alloy Ni20Ti20Ta20Co20Cu20 (at. %) was obtained using vacuum arc melting. In order to characterize such an alloy, microstructure analysis has been performed using Scanning and Transmission Electron Microscopy, Electron Backscattered Diffraction, X-ray Diffraction and Energy Dispersive X-ray Spectroscopy techniques. Microstructure analysis revealed the presence of one rhombohedral and two cubic phases. Energy Dispersive X-ray Spectroscopy measurements revealed that both observed phases include five chemical elements in the structure. Using Rietveld refinement approach the lattice parameters were refined for the observed phases.
引用
收藏
页码：785 / 789
页数：5
相关论文
共 50 条
  • [1] Effect of processing route on phase stability in equiatomic multicomponent Ti20Fe20Ni20Co20Cu20 high entropy alloy
    Mohanty, S.
    Samal, S.
    Tazuddin, A.
    Tiwary, C. S.
    Gurao, N. P.
    Biswas, K.
    MATERIALS SCIENCE AND TECHNOLOGY, 2015, 31 (10) : 1214 - 1222
  • [2] Microstructure and mechanical behavior of a novel Co20Ni20Fe20Al20Ti20 alloy fabricated by mechanical alloying and spark plasma sintering
    Fu, Zhiqiang
    Chen, Weiping
    Wen, Haiming
    Morgan, Sam
    Chen, Fei
    Zheng, Baolong
    Zhou, Yizhang
    Zhang, Lianmeng
    Lavernia, Enrique J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 644 : 10 - 16
  • [3] Synthesis of Multi-component Alloys (Co20Cr20Fe20Mn20Ti20 and Co20Cr20Fe20Mn20Ti20Ni20) by Mechanical Alloying Route
    Turin Datta
    Indranil Manna
    Jyotsna Dutta Majumdar
    High Entropy Alloys & Materials, 2024, 2 (1): : 1 - 15
  • [4] Sinter ageing of equiatomic Al20Co20Cu20Zn20Ni20 high entropy alloy via mechanical alloying
    Mohanty, Sutanuka
    Gurao, N. P.
    Biswas, Krishanu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 617 : 211 - 218
  • [5] Ageing behaviour of equiatomic consolidated Al20Co20Cu20Ni20Zn20 high entropy alloy
    Mohanty, S.
    Gurao, N. P.
    Padaikathan, P.
    Biswas, Krishanu
    MATERIALS CHARACTERIZATION, 2017, 129 : 127 - 134
  • [6] Evolution of microstructure, elemental segregation and magnetic order in Ti20Co20Cu20Fe20Ni20 high entropy alloy
    Mohanty, Sutanuka
    Palit, Mithun
    Pradeep, K. G.
    Biswas, Krishanu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
  • [7] Plastic deformation mechanisms of equiatomic Ni20Ti20Fe20Al20Cu20 high-entropy alloy at high temperatures
    Jiang, Shuyong
    Sun, Dong
    Zhang, Yanqiu
    Wang, Sibing
    Zhao, Chengzhi
    JOURNAL OF MATERIALS SCIENCE, 2017, 52 (06) : 3199 - 3207
  • [8] Cast Microstructure of a Complex Concentrated Noble Alloy Ag20Pd20Pt20Cu20Ni20
    Simic, Lidija
    Rudolf, Rebeka
    Majeric, Peter
    Anzel, Ivan
    MATERIALS, 2022, 15 (14)
  • [9] Temperature effects on microstructure and mechanical properties of sintered high-entropy equiatomic Ti20V20Al20Fe20Cr20alloy for aero-gear application
    Afolabi, Ayodeji Ebenezer
    Popoola, Olawale
    Popoola, Abimbola P. I.
    Aramide, Fatai O.
    Oloruntoba, Daniel T.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (11-12) : 3563 - 3570
  • [10] Viscosity and crystallization of equiatomic Pd20Pt20Cu20Ni20P20 metallic glass
    Nandigama, Kalyan
    Kumar, Golden
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1011
12345