The influence of Al on the properties of cold rolled C-Mn-Si TRIP steels

被引：0

作者：

De Meyer, M ^{[1
]}

Vanderschueren, D ^{[1
]}

De Cooman, BC ^{[1
]}

机构：

[1] Univ Ghent, Lab Iron & Steelmaking, B-9052 Zwijnaarde, Ghent, Belgium

来源：

41ST MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, VOL 37 | 1999年 / 37卷

关键词：

TRIP steels; Aluminium; Silicon; retained austenite; bainite; strain hardening;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The partial substitution of silicon by aluminium in TRIP steels results in very good mechanical properties with an improved formability compared to the conventional C-Mn-Si TRIP steel. The strain hardening behavior was studied in detail and revealed that all the specimens had a very high n value but the strain dependence was different. The strain hardening of C-Mn-Si TRIP steel reaches a maximum at low strain, while the Al alloyed TRIP steel showed a gradual increase of the n value, resulting in a larger uniform elongation. Investigation of the microstructure revealed that the Al alloyed steel contained both a larger volume fraction of retained austenite and a larger amount of bainite with a finer structure than the C-Mn-Si TRIP steel.

引用

页码：265 / 276

页数：12

共 30 条

[21]

NISHIYAMA Z, 1979, MARTENSITE TRANSFORM, P13

[22]

OSTROM P, 1981, MET TECHNOL, V8, P81

[23]

Pichler A, 1998, ISS MWSP CONF P, V36, P259

[24] The modeling of retained austenite in low-alloyed TRIP steels [J].

Reisner, G ;

Werner, EA ;

Kerschbaummayr, P ;

Papst, I ;

Fischer, FD .

JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1997, 49 (09) :62-&

[25] MECHANICAL-PROPERTIES AND RETAINED AUSTENITE IN INTERCRITICALLY HEAT-TREATED BAINITE-TRANSFORMED STEEL AND THEIR VARIATION WITH SI AND MN ADDITIONS [J].

SAKUMA, Y ;

MATSUMURA, O ;

TAKECHI, H .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (02) :489-498

[26] STACKING-FAULT ENERGIES OF 7 COMMERCIAL AUSTENITIC STAINLESS-STEELS [J].

SCHRAMM, RE ;

REED, RP .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1975, 6 (07) :1345-1351

[27] FORMATION OF AUSTENITE DURING INTERCRITICAL ANNEALING OF DUAL-PHASE STEELS [J].

SPEICH, GR ;

DEMAREST, VA ;

MILLER, RL .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (08) :1419-1428

[28]

STAHL T, 1996, Patent No. 19610675

[29] EFFECTS OF VOLUME FRACTION AND STABILITY OF RETAINED AUSTENITE ON DUCTILITY OF TRIP-AIDED DUAL-PHASE STEELS [J].

SUGIMOTO, K ;

USUI, N ;

KOBAYASHI, M ;

HASHIMOTO, S .

ISIJ INTERNATIONAL, 1992, 32 (12) :1311-1318

[30]

ZACKAY VF, 1967, T AM SOC MET, V60, P252

← 1 2 3 →