Design strength of axially loaded RC columns strengthened by steel caging

被引：44
作者：
Calderon, Pedro A. [1 ]
Adam, Jose M. [1 ]
Ivorra, Salvador [2 ]
Pallares, Francisco J. [3 ]
Gimenez, Ester [1 ]
机构：
[1] Univ Politecn Valencia, ICITECH, Dept Ingn Construct & Proyectos Ingn Civil, E-46071 Valencia, Spain
[2] Univ Alicante, Dept Ingn Construct Obras Publ & Infraestruct Urb, E-03080 Alicante, Spain
[3] Univ Politecn Valencia, Dept Fis Aplicada, E-46071 Valencia, Spain
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 10期
关键词：
RC columns; Strengthening; Steel caging; Experimental study; Numerical study; Design strength; BEHAVIOR; STRIPS; ANGLES;
D O I：
10.1016/j.matdes.2009.05.014
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
There are three principal techniques available for strengthening RC columns: concrete jacketing, steel jacketing and composite jacketing (FRP). Steel caging is a variation of the steel jacketing technique and is recognised as being easy to apply and relatively inexpensive. This paper presents a new design proposal that provides a means of calculating the ultimate load of an axially loaded RC column strengthened by steel caging. The formulation of the new proposal is based on the analysis of the failure mechanisms derived from experimental and numerical studies performed on full-scale specimens. The results provided by the application of the new design proposal are compared with those from laboratory tests on full-scale strengthened columns and FE models and are seen to be much more effective than results obtained from other proposals. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：4069 / 4080
页数：12
相关论文
共 24 条
  • [1] Behaviour of axially loaded RC columns strengthened by steel angles and strips
    Adam, J. M.
    Ivorra, S.
    Gimenez, E.
    Moragues, J. J.
    Miguel, P.
    Miragall, C.
    Calderon, P. A.
    [J]. STEEL AND COMPOSITE STRUCTURES, 2007, 7 (05) : 405 - 419
  • [2] Axially loaded RC columns strengthened by steel cages
    Adam, J. M.
    Ivorra, S.
    Pallares, F. J.
    Gimenez, E.
    Calderon, P. A.
    [J]. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 2009, 162 (03) : 199 - 208
  • [3] Column-joint assembly in RC columns strengthened by steel caging
    Adam, J. M.
    Ivorra, S.
    Pallares, F. J.
    Jimenez, E.
    Calderon, P. A.
    [J]. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 2008, 161 (06) : 337 - 348
  • [4] ADAM JM, 2007, THESIS TU VALENCIA
  • [5] Axially loaded RC columns strengthened by steel caging. Finite element modelling
    Adam, Jose M.
    Ivorra, Salvador
    Pallares, Francisco J.
    Gimenez, Ester
    Calderon, Pedro A.
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2009, 23 (06) : 2265 - 2276
  • [6] Experimental study of beam-column joints in axially loaded RC columns strengthened by steel angles and strips
    Adarril, Jose M.
    Gimenez, Ester
    Calderon, Pedro A.
    Pallares, Francisco J.
    Ivorra, Salvador
    [J]. STEEL AND COMPOSITE STRUCTURES, 2008, 8 (04) : 329 - 342
  • [7] *CEB FIB, 2003, B TASK GROUP 7 1, V24
  • [8] RC columns strengthened with bandage - experimental programme and design recommendations
    Cirtek, L
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2001, 15 (08) : 341 - 349
  • [9] Mathematical model of RC banded column behaviour
    Cirtek, L
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2001, 15 (08) : 351 - 359
  • [10] DOLCE M, 2003, P FIB S CONCR STRUCT
123