Influences of excess air coefficient on combustion and emission performance of diesel pilot ignition natural gas engine by coupling computational fluid dynamics with reduced chemical kinetic model

In the presented study, the influence of lean-burn on combustion and emission performance of diesel pilot ignition natural gas engine was investigated by using the method of computational fluid dynamics coupling with the reduced chemical kinetic model. Based on bench tested results, the computational fluid dynamics model was validated in four typical conditions, and then it was used for the simulation at different excess air coefficient. Due to the visibility of computational fluid dynamics results, the combustion medium process and emissions medium products were obtained, which then were used to explain the influence mechanism of excess air coefficient. The simulated results show that, under 50% load, the maximum cylinder pressure becomes larger and the start of combustion is advanced when the excess air coefficient increases from 1.0 to 1.5, and the maximum advance of the start of combustion reaches 9.5 degrees CA. Nevertheless, under 100% load, the start of combustion is advanced first and then retarded. Meanwhile, the higher the excess air coefficient is, the earlier the heat release rate shoots up. When the excess air coefficient increases from 1.2, the 10-50%, 50-90% and 10-90% combustion duration become longer. The nitrogen oxide emission increases as the excess air coefficient rises from 1.0 to 1.1 but decreases if it continues to increase. The unburned methane emission decreases first and then increases with the increase of the excess air coefficient. Nevertheless, at 1500 rpm and full load, the unburned methane emission shoots up as the excess air coefficient changes from 1.3 to 1.5 and the maximum difference of unburned methane emission reaches 3233 ppm.