Research on Wear Behavior of Different Graphite Contents of NBR Under Dry Sliding

被引：0
作者：
Yang, Fengyan [1 ]
Sun, Yingnan [2 ]
Wang, Shijie [2 ]
机构：
[1] Shenyang Univ Technol, Shenyang Aviat Vocat Tech Coll, Sch Mech Engn, Shenyang, Peoples R China
[2] Shenyang Univ Technol, Sch Mech Engn, Shenyang, Peoples R China
来源：
PROCEEDINGS OF 2013 INTERNATIONAL CONFERENCE ON QUALITY, RELIABILITY, RISK, MAINTENANCE, AND SAFETY ENGINEERING (QR2MSE), VOLS I-IV | 2013年
关键词：
graphite; NBR; dry sliding; friction and wear;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
NBR is an important material used for the stator of progressing cavity pump. The wear mechanisms of different graphite contents of NBR by 45# steel under different loads were investigated. On MPV-600 computer-controlled abrasive wear testing machine, the coefficients of friction were measured continuously. Results showed that wear loss and friction coefficient of NBR decrease with the increasing of graphite contents; at low content of graphite, due to low hardness, large amount of elastic deformation, adhesive wear of NBR can be found, in the high content of graphite, abrasive wear is showed.
引用
收藏
页码：1037 / 1039
页数：3
相关论文
共 50 条
  • [41] Lubricated Sliding Wear Behavior of a Cast Iron: Effect of Graphite and/or Talc Fraction in Oil
    Prasad, B. K.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (03) : 413 - 420
  • [42] Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions
    Hashmi, S. A. R.
    Dwivedi, U. K.
    Chand, Navin
    WEAR, 2007, 262 (11-12) : 1426 - 1432
  • [43] High-temperature friction and wear studies of Fe-Cu-Sn alloy with graphite as solid lubricant under dry sliding conditions
    Mushtaq, Shuhaib
    Wani, M. F.
    MATERIALS RESEARCH EXPRESS, 2018, 5 (02):
  • [44] Effect of Velocity and Load on the Dry Sliding Wear Behavior of TC11 Alloy
    Li Yixian
    Wang Shuqi
    Li Xinxing
    Ji Xiulin
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (12) : 3238 - 3242
  • [45] Effect of roughness on the wear behavior of HVOF coatings dry sliding against a friction material
    Federici, Matteo
    Menapace, Cinzia
    Moscatelli, Alessandro
    Gialanella, Stefano
    Straffelini, Giovanni
    WEAR, 2016, 368 : 326 - 334
  • [46] Dry-sliding wear behavior of AISI 4140 barrel steel at elevated temperatures
    Kocyigit, Fatih
    Yildiz, Fethullah
    Gok, M. Sabri
    Cay, Vedat Veli
    MATERIALS TESTING, 2020, 62 (02) : 189 - 195
  • [47] Effects of MoSi2 on Friction and Wear Properties of CoCrNiW Alloy under Dry-sliding Condition
    Li F.-Z.
    Cui G.-J.
    Cheng S.-S.
    Wang X.-B.
    Kou Z.-M.
    Surf. Technol., 2023, 1 (82-92): : 82 - 92
  • [48] Tribological behavior of soot particles under reciprocal dry sliding condition
    Tang, Ka
    Song, Ru-Hong
    Hu, En-Zhu
    Liu, Yi-Ming
    Hu, Xian-Guo
    Mocaxue Xuebao/Tribology, 2015, 35 (02): : 198 - 205
  • [49] Tribological testing of peroxide-cured EPDM rubbers with different carbon black contents under dry sliding conditions against steel
    Felhoes, D.
    Karger-Kocsis, J.
    TRIBOLOGY INTERNATIONAL, 2008, 41 (05) : 404 - 415
  • [50] HIGH TEMPERATURE DRY SLIDING WEAR BEHAVIOUR OF AL-SI/GRAPHITE COMPOSITES PROCESSED BY STIR CASTING
    Rajaram, G.
    Kumaran, S.
    Rao, T. Srinivasa
    Kamaraj, M.
    TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS FABRICATION, PROPERTIES, CHARACTERIZATION, AND MODELING, 2011, : 191 - 198
12345