Selective control over the lamellar thickness of one domain in thin binary blends of block copolymer films

Thin binary blends of poly(styrene-b-methyl methacrylate) (PS-PMMA) block copolymers in films where the lamellar thickness of one domain is controlled while preserving the thickness of the other domain were demonstrated without microphase separation. One of the block copolymers used here was short and symmetric, and the other was long and asymmetric; the molecular weights of the PMMA block chains in the constituents were similar. A random copolymer brush was introduced and film thickness and composition of brush were adjusted to induce perpendicular orientation in thin film. As the blend composition of the long asymmetric block copolymer increased, the PS lamellar thickness increased from 15.8 to 25.1 nm, whereas the PMMA lamellar thickness remained constant at approximately 14 nm (the thickness decreased slightly from 14.0 to 13.3 nm). The domain spacing behavior in thin film was consistent in the bulk. These results were compared with the Birshtein, Zhulina, and Lyatskaya model and the theories for pure block copolymers in the strong segregation limit and in the intermediate segregation regime. (c) 2013 Wiley Periodicals, Inc.