A hybrid prediction method on luminous flux maintenance of high-power LED lamps

被引：21
作者：
Cai, Miao [1 ]
Yang, Daoguo [1 ]
Tian, Kunmiao [1 ]
Chen, Wenbin [1 ]
Chen, Xianping [1 ]
Zhang, Ping [1 ]
Fan, Xuejun [2 ]
Zhang, Guoqi [3 ]
机构：
[1] Guilin Univ Elect Technol, Sch Mech & Elect Engn, Guilin 541004, Peoples R China
[2] Lamar Univ, Dept Mech Engn, Beaumont, TX 77710 USA
[3] Delft Univ Technol, Delft Inst Microsyst & Nanoelect Dimes, NL-2628 CD Delft, Netherlands
来源：
APPLIED THERMAL ENGINEERING | 2016年 / 95卷
基金：
中国国家自然科学基金;
关键词：
High-power LED lamp; Luminous flux maintenance; Lifetime prediction; Thermal modeling; Junction temperature; Thermal measurement; LIGHT-EMITTING-DIODES; JUNCTION-TEMPERATURE; MODULE; RELIABILITY; SIMULATION; PHOSPHOR; DEVICES; DESIGN; MODEL;
D O I：
10.1016/j.applthermaleng.2015.11.034
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
A hybrid method, applied thermal modeling and temperature measurement, is proposed to estimate the junction temperature (T-j) of high-power light-emitting diodes (LEDs) at system level, and further project long term lumen maintenance of LED lamps. First, 3D finite element modeling on commercial LED lamps is performed based on lamp structure and material information to find a steady and reliable relationship between the junction point and a referenced point on the heat sink. Then, accurate thermal measurement is conducted on the heat sink to calibrate and verify the finite element model. The predicted Tj of LEDs from modeling, in conjunction with LM-80 luminous maintenance data using TM-21, is applied to project the luminous flux depreciation at the system level. The proposed approach is validated by aging tests at room ambience. Results show the thermal resistance modeling can be simplified into a one-dimensional model when a LED lamp operates in a steady situation. Thus, the Tj of LED lamps operating at any specified ambient temperature can be achieved quickly. The estimation method for predicting luminous maintenance of LED lamps is efficient and fast. The proposed method is expected to be useful for the fast qualification of LED lamps. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：482 / 490
页数：9
相关论文
共 43 条
  • [1] [Anonymous], CHINASSL
  • [2] [Anonymous], LM8008 IES
  • [3] [Anonymous], 1995, EIAJESD511
  • [4] Cai M., 2012, EUROSIME 2012, p1/6
  • [5] Determination of junction temperature in AlGaInP/GaAs light emitting diodes by self-excited photoluminescence signal
    Chen, N. C.
    Wang, Y. N.
    Tseng, C. Y.
    Yang, Y. K.
    [J]. APPLIED PHYSICS LETTERS, 2006, 89 (10)
  • [6] On the thermal characterization of an RGB LED-based white light module
    Cheng, Hsien-Chie
    Lin, Jia-Yun
    Chen, Wen-Hwa
    [J]. APPLIED THERMAL ENGINEERING, 2012, 38 : 105 - 116
  • [7] Improved radial heat sink for led lamp cooling
    Costa, Vitor A. F.
    Lopes, Antonio M. G.
    [J]. APPLIED THERMAL ENGINEERING, 2014, 70 (01) : 131 - 138
  • [8] Department of Energy (DOE) U.S, US SOL STAT LIGHT RE
  • [9] Prognostics of lumen maintenance for High power white light emitting diodes using a nonlinear filter-based approach
    Fan, Jiajie
    Yung, Kam-Chuen
    Pecht, Michael
    [J]. RELIABILITY ENGINEERING & SYSTEM SAFETY, 2014, 123 : 63 - 72
  • [10] Can thermocouple measure surface temperature of light emitting diode module accurately?
    Fu, Xing
    Luo, Xiaobing
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 65 : 199 - 202
12345