Microstructure and strengthening mechanisms of a cast Mg-1.48Gd-1.13Y-0.16Zr (at.%) alloy

被引：94

作者：

Gao, L. ^{[1
,2
]}

Chen, R. S. ^{[1
]}

Han, E. H. ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Peoples R China

[2] Chinese Acad Sci, Grad Sch, Beijing, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE | 2009年 / 44卷 / 16期

关键词：

Y-ZR ALLOYS; MG-Y; WT.PERCENT ALLOY; PRECIPITATION; 250-DEGREES-C; BEHAVIOR; SYSTEM; AL;

D O I：

10.1007/s10853-009-3672-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructure and mechanical properties of a Mg-1.48Gd-1.13Y-0.16Zr (at.%) alloy in the as-cast, solution-treated, peak-aged and over-aged conditions have been investigated by a combination of thermodynamic calculations and experimental approaches. It is shown that both the Mg-24(Gd,Y)(5) and cuboid-shaped Mg-5(Gd,Y) phases exist in the as-cast sample, which is in good agreement with the Scheil solidification model. The former is dissolved during solution treatment, while the latter persists and coarsens. Subsequent artificial ageing results in the formation of metastable beta' precipitates within the alpha-Mg matrix and along the grain boundaries. The peak-aged alloy exhibits maximum ultimate tensile strength and tensile yield strength of 370 and 277 MPa, respectively, at room temperature. Moreover, the strengths decrease gently from room temperature to 250 A degrees C with a gradual increase of elongation. The strengthening contributions to the yield strength are quantitatively evaluated from individual strengthening mechanisms by using measured microstructural parameters. The modelled yield strengths are compared with the experimental results and a reasonable agreement is reached.

引用

页码：4443 / 4454

页数：12

共 33 条

[1] Creep properties of Mg-Gd-Y-Zr alloys [J].

Anyanwu, IA ;

Kamado, S ;

Kojima, Y .

MATERIALS TRANSACTIONS, 2001, 42 (07) :1212-1218

[2]

Dahle A.K., 2001, Journal of Light Metals, V1, P61

[3] SGTE DATA FOR PURE ELEMENTS [J].

DINSDALE, AT .

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 1991, 15 (04) :317-425

[4] Developing superplasticity in a magnesium AZ31 alloy by ECAP [J].

Figueiredo, Roberto B. ;

Langdon, Terence G. .

JOURNAL OF MATERIALS SCIENCE, 2008, 43 (23-24) :7366-7371

[5] GDMG5 - A COMPLEX STRUCTURE WITH A LARGE CUBIC CELL [J].

FORNASINI, ML ;

MANFRINETTI, P ;

GSCHNEIDNER, KA .

ACTA CRYSTALLOGRAPHICA SECTION C-CRYSTAL STRUCTURE COMMUNICATIONS, 1986, 42 :138-141

[6]

Friedrich H. E, 2006, MG TECHNOLOGY

[7] Effects of rare-earth elements Gd and Y on the solid solution strengthening of Mg alloys [J].

Gao, L. ;

Chen, R. S. ;

Han, E. H. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 481 (1-2) :379-384

[8] Solid solution strengthening behaviors in binary Mg-Y single phase alloys [J].

Gao, L. ;

Chen, R. S. ;

Han, E. H. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 472 (1-2) :234-240

[9] Microstructure evolution in a Mg-15Gd-0.5Zr (wt.%) alloy during isothermal aging at 250°C [J].

Gao, X. ;

He, S. M. ;

Zeng, X. Q. ;

Peng, L. M. ;

Ding, W. J. ;

Nie, J. F. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 431 (1-2) :322-327

[10] Behavior of Mg-15Gd-5Y-0.5Zr alloy during solution heat treatment from 500 to 540°C [J].

Gao, Yan ;

Wang, Qudong ;

Gu, Jinhai ;

Zhao, Yang ;

Tong, Yan .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 459 (1-2) :117-123

← 1 2 3 4 →