Influence of dispersion forces on phase equilibria between thin liquid films and their vapour

Heat transfer and nucleation processes in nucleate boiling strongly depend on the phase equilibrium at the liquid-vapour interface. In a certain region between heated wall and a vapour bubble where a thin liquid film is adsorbed, phase equilibria are considerably influenced by dispersion forces acting on the liquid film. As shown in the paper in such systems the chemical potential, decisive for phase equilibria between liquid films and their vapour, contains an additional term for the action of dispersion forces, and differs from the chemical potential of dispersion-free systems, though their chemical potential is usually taken in the literature for systems with dispersion forces. With the aid of the chemical potential the Kelvin equations for the pressures at the liquid-vapour interface were derived. It turned out that the Gibbs assumption of a geometrical interface between extremely thin liquid films in equilibrium with its vapour does not hold. Instead, following the ideas of van der Waals junior, the small but finite transition interlayer between both phases had to be introduced. As numerical examples illustrate, the dispersion forces considerably influence the pressures at the liquid-vapour interface. In nucleate boiling processes the driving pressure difference for evaporation undergoes a maximum within a tiny area underneath vapour bubbles. As could be shown the maximum driving pressure difference between gas-side interface and gas-core is a considerable fraction of the vapour pressure itself and contributes significantly to the high heat fluxes in nucleate boiling. (C) 2002 Published by Elsevier Science Ltd.