THE INFLUENCE OF ALLOYING ELEMENTS IN ALUMINIUM ON THE GRAIN REFINEMENT WITH ALTI5B1

被引：0

作者：

Naglic, I. ^{[1
]}

Smolej, A. ^{[2
]}

Dobersek, M. ^{[1
]}

机构：

[1] Inst Met & Technol, Ljubljana, Slovenia

[2] Univ Ljubljana, Fac Nat Sci & Engn, Ljubljana, Slovenia

来源：

METALURGIJA | 2009年 / 48卷 / 03期

关键词：

aluminium; casting; solidification; grain refinement; MODEL; SIZE;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This work deals with the influence of alloying elements in aluminium on the grain refinement with various additions of AlTi5B1. Grain-refinement tests were made at a cooling rate of 15 degrees C/s. The results revealed that in both aluminium and an Al-Fe alloy the grain size decreases with increasing additions of the AlTi5B1 grain refiner. We found that for the same boron content the grain size was smaller in the case of the Al-Fe alloy. The difference in the grain sizes for the same content of boron was approximately 15 mu m; this is considerably smaller than the difference between the grain sizes in samples with the same difference of growth-restricting factor made at slower cooling rates.

引用

页码：147 / 150

页数：4

共 22 条

[1] Backerud L, 1996, LIGHT METALS 1996, P679
[2] Birol Y, 2002, LIGHT MET, P923
[3] The performance of Al-Ti-C grain refiners in twin-roll casting of aluminium foilstock
Birol, Yucel
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 430 (1-2) : 179 - 187
[4] Chai G, 1995, MATER SCI TECH SER, V11, P1099, DOI 10.1179/026708395790164535
[5] A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles
Easton, MA
StJohn, DH
[J]. ACTA MATERIALIA, 2001, 49 (10) : 1867 - 1878
[6] Modelling of inoculation of metallic melts: Application to grain refinement of aluminium by Al-Ti-B
Greer, AL
Bunn, AM
Tronche, A
Evans, PV
Bristow, DJ
[J]. ACTA MATERIALIA, 2000, 48 (11) : 2823 - 2835
[7] Hutt JEC, 1999, LIGHT METALS 1999, P685
[8] Johnsson M, 1996, Z METALLKD, V87, P216
[9] JOHNSSON M, 1994, Z METALLKD, V85, P781
[10] Effects and mechanisms of grain refinement in aluminium alloys
Kashyap, KT
Chandrashekar, T
[J]. BULLETIN OF MATERIALS SCIENCE, 2001, 24 (04) : 345 - 353

← 1 2 3 →