Comparative design analysis on turning of AISI 4340 using finite element model

被引：4

作者：

Mohan, E. ^{[1
]}

Azaath, L. Mamundi ^{[1
]}

Natarajan, U. ^{[2
]}

Raghuraman, S. ^{[1
]}

机构：

[1] Mt Zion Coll Engn & Technol, Dept Mech Engn, Pudukkottai, India

[2] Alagappa Chettiar Govt Coll Engn & Technol, Dept Mech Engn, Karaikkudi, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 33卷

关键词：

Deform2D; Cutting force; Tool temperature; Dry machining; Simulation & finite element model; OPTIMIZATION;

D O I：

10.1016/j.matpr.2020.02.049

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The modeling and simulation of metal cutting processes become very important method in order to decrease the cost of the experimental investigations. This investigation focused on the validation of simulated cutting forces obtained from a finite element based Deform2D software. Also study the variation of cutting speed and feed rate on cutting forces and tool interface temperature in the cutting zone region has been studied using Finite Element Model (FEM). Deform2D software was implemented to simulate the cutting forces and tool interface temperature during machining with different speed and feed rate with constant depth (1 mm) at normal room temperature. The cutting forces and tool tip temperature values were gradually increased with increment in cutting speed and feed rate. The optimum minimized values of cutting force and tool tip temperature was predicted with the aid of taguchi analysis. It was found that the optimum value obtained from taguchi method was compared with simulated result by Deform2D and dry machining. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：2761 / 2766

页数：6

共 12 条

[1]

Alok Anupam, 2017, PROCEDIA COPEN, V10, P433

[2] Finite element modeling and validation of chip segmentation in machining of AISI 1045 steel [J].

Devotta, Ashwin ;

Beno, Tomas ;

Siriki, Raveendra ;

Lof, Ronnie ;

Eynian, Mandi .

16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 2017, 58 :499-504

[3] Numerical Modelling and Optimization of Surface Finish during Peripheral Milling of AISI 4340 Steel using RSM [J].

Gopikrishnan, P. ;

Akbar, Aalim ;

Asokan, Ashwin ;

Bhaskar, Bharath ;

Sumesh, C. S. .

MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) :24612-24621

[4]

Gupta MK, 2015, INDIAN J ENG MATER S, V22, P679

[5] Influence of friction models on FE simulation results of orthogonal cutting process [J].

Malakizadi, Amir ;

Hosseinkhani, Keyvan ;

Mariano, Emilia ;

Ng, E. ;

Del Prete, Antonio ;

Nyborg, Lars .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 88 (9-12) :3217-3232

[6]

Marimuthu KP, 2018, MATER TODAY-PROC, V5, P11780

[7] Experimental Study and Modelling of Plastic Deformation of Cemented Carbide Tools in Turning [J].

Nordgren, Anders ;

Samani, Baktash Zargari ;

M'Saoubi, Rachid .

6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 :599-604

[8] Effect of cutting parameters on surface residual stresses in dry turning of AISI 1035 alloy [J].

Salman, K. H. ;

Elsheikh, Ammar H. ;

Ashham, M. ;

Ali, Mohammed Kamal Ahmed ;

Rashad, Maher ;

Haiou, Zhang .

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (08)

[9] Finite Element Modeling and Machining of Al 7075 Using Coated Cutting Tools [J].

Sreeramulu, D. ;

Rao, C. J. ;

Sagar, Y. ;

Venkatesh, M. .

MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) :8364-8373

[10] Machinability investigations on hardened AISI 4340 steel using coated carbide insert [J].

Suresh, R. ;

Basavarajappa, S. ;

Gaitonde, V. N. ;

Samuel, G. L. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 33 :75-86

← 1 2 →