Magras - Facility for modelling of plasma facing beryllium sputtering and re-deposition

被引：10
|
作者：
Zimin, AM
Elistratov, NG
Kolbasov, BN
Kozlov, OS
Kurochkin, YY
Milyukov, DA
Vasiliev, NN
机构：
[1] NE Bauman Moscow State Tech Univ, Dept E8, Moscow 107005, Russia
[2] Kurchatov Inst, Russell Res Ctr, Moscow 123182, Russia
[3] John Stock Co, Inst Beryllium, Moscow 141070, Russia
来源：
PLASMA DEVICES AND OPERATIONS | 1999年 / 8卷 / 01期
关键词：
fusion reactor; plasma-surface interaction; magnetron; beryllium sputtering; erosion products;
D O I：
10.1080/10519999908228143
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
MAGRAS - magnetron facility for simulation of plasma facing beryllium sputtering and re-deposition is described. Optimization of its systems and components along with magnetron discharge phenomenology and its energy characteristics are considered. Studies performed at the facility can be used in designing plasma facing components of International Thermonuclear Experimental Reactor: in particular for their material selection, assessment of the life-time and determination of the near-wall plasma composition.
引用
收藏
页码：15 / 38
页数：24
相关论文
共 31 条
  • [21] Sputtering erosion of beryllium coated plasma facing components - general considerations and analysis for ITER detached plasma regime
    Brooks, JN
    Ruzic, DN
    Hayden, DB
    FUSION ENGINEERING AND DESIGN, 1997, 37 (04) : 455 - 463
  • [22] UWAVS first mirror after long plasma cleaning: Surface properties and material re-deposition issues
    Ushakov, Andrey
    Verlaan, Ad
    Ebeling, Rob
    Wu, Chien-Ching
    O'Neill, Ray
    Smith, Mark
    Stratton, Brentley
    Koster, Norbert
    Gattuso, Anthony
    Lasnier, Charles J.
    Feder, Russell
    Maniscalco, Matthew P.
    Verhoeff, Peter
    FUSION ENGINEERING AND DESIGN, 2019, 146 : 1559 - 1563
  • [23] Demonstration of modification from AlF3 re-deposition to polymer re-deposition on Air Bearing Surface (ABS) Etched Sidewall of Fluorine-Based Plasma Etch on Al2O3-TiC Substrate
    Pakpum, Chupong
    Siangchaew, Krisda
    Limsuwan, Pichet
    ADVANCED MATERIALS RESEARCH, 2011, 213 : 93 - +
  • [24] Realization of critical distance during the interplay between re-deposition and secondary sputtering from milling of angular side wall with a focused ion beam
    Saraf, Laxmikant V.
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2011, 269 (13): : 1540 - 1547
  • [25] Insight into the Re-Deposition Equilibrium of Sn Contaminant on Euv Multi-Layer Mirror Surface During Hydrogen Plasma Cleaning
    Wang, Sishu
    Ye, Zongbiao
    Wu, Andong
    Lu, Qipeng
    Song, Yuan
    Yu, Xingang
    Wei, Jianjun
    Gao, Tao
    Gou, Fujun
    SSRN,
  • [26] Tin re-deposition and erosion measured by cavity-ring-down-spectroscopy under a high flux plasma beam
    Kvon, V.
    Al, R.
    Bystrov, K.
    Peeters, F. J. J.
    van de Sanden, M. C. M.
    Morgan, T. W.
    NUCLEAR FUSION, 2017, 57 (08)
  • [27] Study of wall re-deposition on DC-grounded ITER-relevant mirrors with RF plasma in a first mirror unit
    Soni, Kunal
    Steiner, Roland
    Antunes, Rodrigo
    Moser, Lucas
    Shigin, Pavel
    Reichle, Roger
    Marot, Laurent
    Meyer, Ernst
    NUCLEAR FUSION, 2021, 61 (12)
  • [28] Erosion/re-deposition modeling in an ITER divertor-like high-density, low-temperature plasma beam
    van Swaaij, G. A.
    Kirschner, A.
    Borodin, D.
    Goedheer, W. J.
    Bystrov, K.
    De Temmerman, G.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2014, 56 (09)
  • [29] Study on re-sputtering during CNx film deposition through spectroscopic diagnostics of plasma
    Liang, Peipei
    Yang, Xu
    Li, Hui
    Cai, Hua
    Sun, Jian
    Xu, Ning
    Wu, Jiada
    PHYSICS OF PLASMAS, 2015, 22 (10)
  • [30] An X-ray Photoelectron Spectroscopy Investigation of Re-deposition from Fluorine-based Plasma Etch on Magnetic Recording Slider Head Substrate
    Limcharoen, A.
    Pakpum, C.
    Limsuwan, P.
    ISEEC, 2012, 32 : 1043 - 1049
1234