Fracture toughness and deformation mechanism of un-vulcanized and dynamically vulcanized polypropylene/ethylene propylene diene monomer/graphene nanocomposites

被引:51
作者
Haghnegandar, M. [1 ]
Naderi, G. [1 ]
Ghoreishy, M. H. R. [1 ]
机构
[1] Iran Polymer & Petrochem Inst, Dept Polymer Proc, Tehran, Iran
关键词
Fracture toughness; Impact behavior; Nano composites; Notch; Fractography; ESSENTIAL WORK; THERMOPLASTIC ELASTOMERS; GRAPHENE NANOPLATELETS; ELECTRICAL-PROPERTIES; BEHAVIOR; MORPHOLOGY; BLENDS;
D O I
10.1016/j.compscitech.2017.01.015
中图分类号
TB33 [复合材料];
学科分类号
摘要
Polypropylene (PP)/Ethylene propylene diene monomer (EPDM)/graphene nanocomposites were prepared by melt mixing process via an internal mixer (Brabender plasti-corder). The effect of multi -layer graphene (MLG), few -layer graphene (FLG) and dynamic vulcanization on microstructure and fracture toughness of the multicomponent system were investigated. The morphology of the samples were characterized by wide X-ray diffraction (WAX), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) which revealed that graphene mostly was dispersed into the PP phase and the size of the dispersed phase (EPDM) was decreased with incorporation of graphene, more specifically FLG, in both un-vulcanized and vulcanized systems. The concept of essential work of fracture (EWF) was used to analyze the fracture toughening behavior and deformation mechanism of PP/EPDM/graphene nanocomposites. In the case of un-vulcanized polymer, the total work of fracture improvements (+23.5%) was noted for PP/EPDM/FLG in which FLG platelets with higher aspect ratio were used, showed the better dispersion and higher ductility fracture behavior compared with MLG. The fracture mechanism of unvulcanized samples occurs due to debonding and/or cavitation of the dispersed phase (EPDM), while for vulcanized samples the fracture mechanism proceeds through creation of nanovoids and cavitation in the dispersed phase which lead to the shear yielding of PP matrix. The graphene platelets acted as crack initiation sites as well as obstacles" against crack propagation. The results of microstructure properties along with the fracture analysis data showed that the aggregated MLG platelets act as stress concentration and facilitate the initiate cracks while the FLG platelets hindered the crack path. Improvement in toughness behavior and matrix resistance were attributed to higher voiding stresses and finer dispersion of graphene. (C)2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:83 / 98
页数:16
相关论文
共 54 条
[1]   Fracture Toughness of Polypropylene-Based Particulate Composites [J].
Arencon, David ;
Ignacio Velasco, Jose .
MATERIALS, 2009, 2 (04) :2046-2094
[2]   The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites [J].
Atif, R. ;
Shyha, I. ;
Inam, F. .
RSC ADVANCES, 2016, 6 (41) :34188-34197
[3]   Mechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites-A Review [J].
Atif, Rasheed ;
Shyha, Islam ;
Inam, Fawad .
POLYMERS, 2016, 8 (08)
[4]   Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: A review [J].
Barany, T. ;
Czigany, T. ;
Karger-Kocsis, J. .
PROGRESS IN POLYMER SCIENCE, 2010, 35 (10) :1257-1287
[5]   Controlled properties of high-impact polypropylene in-reactor alloys by tailoring chemical structure and morphology [J].
Chen, Jinyao ;
Kang, Jian ;
Yang, Junqi ;
Zhu, Shipeng ;
Yang, Feng ;
Cao, Ya ;
Xiang, Ming ;
Li, Huilin .
JOURNAL OF POLYMER RESEARCH, 2015, 22 (09)
[6]   Morphology and properties of polypropylene/nano-CaCO3 composites prepared by supercritical carbon dioxide-assisted extrusion [J].
Chen, Shihong ;
Wang, Xiangdong ;
Ma, Xiuqing ;
Wang, Kuisheng .
JOURNAL OF MATERIALS SCIENCE, 2016, 51 (02) :708-718
[7]   Structure and properties of peroxide dynamically vulcanized polypropylene/ethylene-propylene-diene/zinc dimethacrylate composites [J].
Chen, Yukun ;
Xu, Chuanhui ;
Cao, Liming ;
Wang, Yanpeng .
POLYMER COMPOSITES, 2012, 33 (07) :1206-1214
[8]   Constructing sacrificial bonds and hidden lengths for ductile graphene/polyurethane elastomers with improved strength and toughness [J].
Chen, Zhongxin ;
Lu, Hongbin .
JOURNAL OF MATERIALS CHEMISTRY, 2012, 22 (25) :12479-12490
[9]   The Fabrication, Properties, and Uses of Graphene/Polymer Composites [J].
Du, Jinhong ;
Cheng, Hui-Ming .
MACROMOLECULAR CHEMISTRY AND PHYSICS, 2012, 213 (10-11) :1060-1077
[10]   Mechanical, thermal, and rheological properties of graphene-based polypropylene nanocomposites prepared by melt mixing [J].
El Achaby, Mounir ;
Arrakhiz, Fatima-Ezzahra ;
Vaudreuil, Sebastien ;
el Kacem Qaiss, Abou ;
Bousmina, Mostapha ;
Fassi-Fehri, Omar .
POLYMER COMPOSITES, 2012, 33 (05) :733-744