Properties of Cu/Fe-Mn and Cu/Fe-Cr Metal Matrix Composites Produced by Powder Metallurgy

被引:2
|
作者
Turhan, Hueseyin [1 ]
Oezel, Serkan [1 ]
机构
[1] Firat Univ, Fac Tech Educ Sci, Dept Met, TR-23169 Elazig, Turkey
来源
MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION | 2009年 / 51卷 / 03期
关键词
REINFORCED ALUMINUM; WEAR; DEFORMATION; MECHANISM; STRESS; STEEL;
D O I
10.3139/120.110011
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Ferro-manganese and ferro-chromium particles (FeMn(p) and FeCr(p)) were added to a copper matrix and examined for applications requiring wear resistance and rupture strength. Cu/FeMn(p), Cu/FeCr(p) and Cu/FeMn(p)/FeCr(p) metal matrix composites (MMCs) were prepared using a powder metallurgy technique to get a homogeneous distribution of particles in controlled amounts. Powders were mixed, compacted, and sintered in a protective argon gas environment. In a wear test, the MMCs showed a favorable resistance to weight loss when pressed against a moving AISI 304 stainless steel wear plate. Rupture strength was determined using a standard transverse rupture test. Fractographs taken of wear and ruptured surfaces together with rupture strength measurements were correlated. with the amount and type of particle reinforcement and MMC hardness. The formation of Metal Carbide (MC) and Metal Oxide (MO) around reinforcing particles was also considered. Transverse rupture strength was found to decrease after exceeding a specific amount of reinforcement.
引用
收藏
页码:141 / 146
页数:6
相关论文
共 50 条
  • [31] Influence of Fe content on microstructure and performance of powder metallurgy Cu-Fe alloys
    Zhang, Ping
    Yuan, Xiao-bo
    Zeng, Zi-ming
    Teng, Jian-wei
    Zhou, Yun-he
    Yang, Biao-biao
    Li, Yun-ping
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2024, 34 (05) : 1571 - 1587
  • [32] Microstructure and properties of Cu-Fe alloys fabricated via powder metallurgy and rolling
    Zhang, Chenzeng
    Chen, Cunguang
    Huang, Lina
    Lu, Tianxing
    Li, Pei
    Wang, Wenwen
    Yang, Fang
    Volinsky, Alex A.
    Guo, Zhimeng
    POWDER METALLURGY, 2021, 64 (04) : 308 - 320
  • [33] Microstructure and properties evolution of rolled powder metallurgy Cu-30Fe alloy
    Zhang, Chenzeng
    Chen, Cunguang
    Li, Pei
    Yan, Mengjie
    Qin, Qian
    Yang, Fang
    Wang, Wenwen
    Guo, Zhimeng
    Volinsky, Alex A.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 909
  • [34] Microstructural characterisation of Ti-Nb-(Fe-Cr) alloys obtained by powder metallurgy
    Amigo, A.
    Zambrano, J.
    Martinez, S.
    Amigo, V.
    POWDER METALLURGY, 2014, 57 (05) : 316 - 319
  • [35] Tribological characteristics of powder metallurgy processed Cu- WC/SiC metal matrix composites
    Satishkumar, P.
    Mahesh, G.
    Meenakshi, R.
    Vijayan, S. N.
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 459 - 465
  • [36] STRUCTURE AND PROPERTIES OF POWDER METALLURGY Al/Al-Si-Fe-Cu-Mg COMPOSITES WITH CHEMICAL COMPOSITION GRADIENT
    Szczepanik, Stefan
    Krawiarz, Jerzy
    COMPOSITES THEORY AND PRACTICE, 2008, 8 (04): : 369 - 374
  • [37] Influence of ultrafine Fe-Cr powder on properties of Fe-based sintered material
    Cheng, Wen-Kong
    Chen, Hua
    Liu, Yong-Bing
    Li, Yue-Ying
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2007, 28 (04): : 22 - 25
  • [38] Fe-Cr-Mo、Cu-Zn-Al、Fe-Mn合金减振性能的研究
    黄姝珂
    李宁
    文玉华
    胥永刚
    滕劲
    丁胜
    振动与冲击, 2007, (09) : 24 - 26+167
  • [39] Ti based metal matrix composites produced by powder metallurgy routes
    Liu, ZG
    Gabbitas, B
    Zhang, DL
    Liang, J
    Gao, W
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 : 95 - 97
  • [40] Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys
    Chauhan, Sandeep
    Verma, Vikas
    Prakash, Ujjwal
    Tewari, P. C.
    Khanduja, Dinesh
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2017, 24 (08) : 918 - 925