Torsional fatigue with axial constant stress for Sn-3Ag-0.5Cu lead-free solder

被引:11
作者
Liang, Ting [1 ]
Liang, Yongfeng [1 ]
Fang, Jiaye [1 ]
Chen, Gang [1 ]
Chen, Xu [1 ]
机构
[1] Tianjin Univ, Sch Chem Engn & Technol, Tianjin 300072, Peoples R China
基金
中国国家自然科学基金;
关键词
Multiaxial; Ratcheting-fatigue; Constitutive model; Fatigue life prediction; Sn-3Ag-0.5Cu; KINEMATIC HARDENING RULES; CONSTITUTIVE MODEL; RATCHETING DEFORMATION; DYNAMIC RECOVERY; STAINLESS-STEEL; CRITICAL STATE; BEHAVIOR; ALLOY; JOINTS; LIFE;
D O I
10.1016/j.ijfatigue.2014.02.008
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A series of multiaxial ratcheting-fatigue interaction tests have been carried out on Sn-3Ag-0.5Cu lead-free solder specimens. All tests were conducted under cyclic shear strain with the constant axial stress at the room temperature with the shear strain rate of 5 x 10(-3) s(-1). It was found that the ratcheting strain increased with increasing axial stress and shear strain amplitude while the fatigue life decreased at the same time. The ratcheting strain rate was linear with axial stress in double logarithmic coordinate. The Ohno-Wang II constitutive model was employed to simulate the stress-strain responses. Several fatigue life prediction models were applied to predict the multiaxial ratcheting-fatigue life of the Sn-3Ag-0.5Cu lead-free solder. The Gao-Chen model which adopted the maximum shear strain and the ratcheting strain rate as the damage parameter predicted the multiaxial ratcheting fatigue life well. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:203 / 211
页数:9
相关论文
共 50 条
  • [41] Influence of ZnO Particles Addition on Interface Morphology Evolution of Sn-3Ag-0.5Cu Solder Joints
    Qu, Min
    Cao, Tianze
    Cui, Yan
    Liu, Fengbin
    Jiao, Zhiwei
    MATERIALS SCIENCE, ENERGY TECHNOLOGY AND POWER ENGINEERING II (MEP2018), 2018, 1971
  • [42] Tensile creep and microstructural characterization of bulk Sn3.9Ag0.6Cu lead-free solder
    Xiao, Q
    Armstrong, WD
    JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (02) : 196 - 211
  • [43] Tensile creep and microstructural characterization of bulk Sn3.9Ag0.6Cu lead-free solder
    Qiang Xiao
    William D. Armstrong
    Journal of Electronic Materials, 2005, 34 : 196 - 211
  • [44] The Effect of Bi and Zn Additives on Sn-Ag-Cu Lead-Free Solder Alloys for Ag Reduction
    Kang, Yubin
    Choi, Jin-Ju
    Kim, Dae-Guen
    Shim, Hyun-Woo
    METALS, 2022, 12 (08)
  • [45] Improved creep resistance and thermal behavior of Ni-doped Sn-3.0Ag-0.5Cu lead-free solder
    El-Daly, A. A.
    El-Taher, A. M.
    Dalloul, T. R.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 587 : 32 - 39
  • [46] Mechanical properties versus temperature relation of individual phases in Sn-3.0Ag-0.5Cu lead-free solder alloy
    Gao, Feng
    Nishikawa, Hiroshi
    Takemoto, Tadashi
    Qu, Jianmin
    MICROELECTRONICS RELIABILITY, 2009, 49 (03) : 296 - 302
  • [47] The Microstructure, Thermal, and Mechanical Properties of Sn-3.0Ag-0.5Cu-xSb High-Temperature Lead-Free Solder
    Li, Chaojun
    Yan, Yanfu
    Gao, Tingting
    Xu, Guodong
    MATERIALS, 2020, 13 (19) : 1 - 11
  • [48] Interfacial Reactions of Ag and Ag-4Pd Stud Bumps with Sn-3Ag-0.5Cu Solder for Flip Chip Packaging
    Chen, Chun-Hao
    Hsu, Shih-Wen
    Chuang, Tung-Han
    JOURNAL OF ELECTRONIC MATERIALS, 2021, 50 (01) : 249 - 257
  • [49] Investigation of anodic dissolution behaviour of intermetallic compound in Sn-3Ag-0.5Cu solder alloy by cyclic voltammetry
    Ahmad, Ibrahym
    Abu Seman, Anasyida
    Mohamad, Ahmad Azmin
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2019, 31 (04) : 211 - 220
  • [50] Effect of the Second-Phase Particle Distribution on the Brittle Fracture Behavior of Sn-3Ag-0.5Cu Solder
    Zhao, Xiangxi
    Zhang, Wei
    Wang, Chunqing
    Liu, Wei
    Hang, Chunjin
    JOURNAL OF ELECTRONIC MATERIALS, 2023, 52 (05) : 3394 - 3400