Torsional fatigue with axial constant stress for Sn-3Ag-0.5Cu lead-free solder

被引:11
作者
Liang, Ting [1 ]
Liang, Yongfeng [1 ]
Fang, Jiaye [1 ]
Chen, Gang [1 ]
Chen, Xu [1 ]
机构
[1] Tianjin Univ, Sch Chem Engn & Technol, Tianjin 300072, Peoples R China
基金
中国国家自然科学基金;
关键词
Multiaxial; Ratcheting-fatigue; Constitutive model; Fatigue life prediction; Sn-3Ag-0.5Cu; KINEMATIC HARDENING RULES; CONSTITUTIVE MODEL; RATCHETING DEFORMATION; DYNAMIC RECOVERY; STAINLESS-STEEL; CRITICAL STATE; BEHAVIOR; ALLOY; JOINTS; LIFE;
D O I
10.1016/j.ijfatigue.2014.02.008
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A series of multiaxial ratcheting-fatigue interaction tests have been carried out on Sn-3Ag-0.5Cu lead-free solder specimens. All tests were conducted under cyclic shear strain with the constant axial stress at the room temperature with the shear strain rate of 5 x 10(-3) s(-1). It was found that the ratcheting strain increased with increasing axial stress and shear strain amplitude while the fatigue life decreased at the same time. The ratcheting strain rate was linear with axial stress in double logarithmic coordinate. The Ohno-Wang II constitutive model was employed to simulate the stress-strain responses. Several fatigue life prediction models were applied to predict the multiaxial ratcheting-fatigue life of the Sn-3Ag-0.5Cu lead-free solder. The Gao-Chen model which adopted the maximum shear strain and the ratcheting strain rate as the damage parameter predicted the multiaxial ratcheting fatigue life well. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:203 / 211
页数:9
相关论文
共 50 条
  • [31] Effect of Addition Cobalt Nanoparticles on Sn-Ag-Cu Lead-free Solder
    Tay, S. L.
    Haseeb, A. S. M. A.
    Johan, Mohd Rafie
    2010 12TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2010, : 433 - 436
  • [32] Tensile and Fatigue Properties of Miniature Size Specimen of Sn-3.5Ag-0.5Cu-0.07Ni-0.01Ge Lead-Free Solder
    Yokoi, Masaki
    Kobayashi, Tatsuya
    Shohji, Ikuo
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 2081 - 2086
  • [33] Enhancing the Ductility of Sn-Ag-Cu Lead-Free Solder Joints by Addition of Compliant Intermetallics
    Xie, H. X.
    Chawla, N.
    JOURNAL OF ELECTRONIC MATERIALS, 2013, 42 (03) : 527 - 536
  • [34] Study of Solidification Cracks in Sn-Ag-Cu Lead-Free Solder Joints
    Dong, Wenxing
    Shi, Yaowu
    Lei, Yongping
    Xia, Zhidong
    Guo, Fu
    JOURNAL OF ELECTRONIC MATERIALS, 2009, 38 (09) : 1906 - 1912
  • [35] Creep and thermomechanical fatigue properties of in situ Cu6Sn5 reinforced lead-free composite solder
    Tai, F.
    Guo, F.
    Han, M. T.
    Xia, Z. D.
    Lei, Y. P.
    Shi, Y. W.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15): : 3335 - 3342
  • [36] Development of a lead-free composite solder from Sn-Ag-Cu and Ag-coated carbon nanotubes
    Chantaramanee, S.
    Wisutmethangoon, S.
    Sikong, L.
    Plookphol, T.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2013, 24 (10) : 3707 - 3715
  • [37] Effect of voids on thermomechanical cracking in lead-free Sn3Ag0.5Cu interconnections of power modules
    Hagberg, Juha
    Nousiainen, Olli
    Putaala, Jussi
    Salmela, Olli
    Raumanni, Juha
    Rahko, Matti
    Kangasvieri, Tero
    Jaaskelainen, Jussi
    Galkin, Timo
    Jantunen, Heli
    MICROELECTRONICS RELIABILITY, 2020, 109
  • [38] Intermetallic compounds formed at the interface between Cu substrate and an Sn-9Zn-0.5Ag lead-free solder
    Chang, TC
    Hon, MH
    Wang, MC
    MATERIALS RESEARCH BULLETIN, 2003, 38 (05) : 909 - 916
  • [39] Shear deformation behavior of a Sn-3Ag-0.5Cu single solder ball at intermediate strain rates
    Joo, Se-Min
    Kim, Ho-Kyung
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2711 - 2717
  • [40] Impact Properties of Sn-3Ag-0.5Cu Solder Ball Joint with Epoxy-Based Flux
    Ishiyama, Akiyoshi
    Shohji, Ikuo
    Ganbe, Tatsuya
    Watanabe, Hirohiko
    2014 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP), 2014, : 766 - 769