Numerical Modeling of a Single-Point Mooring Cage With a Frontal Rigid Frame

被引:22
作者
Huang, Chai-Cheng [1 ]
Tang, Hung-Jie [1 ]
Pan, Jen-Ya [2 ]
机构
[1] Natl Sun Yat Sen Univ, Dept Marine Environm & Engn, Asian Pacific Ocean Res Ctr, Kaohsiung 80424, Taiwan
[2] UNION TECH Engn Consultants Co, Taipei 10570, Taiwan
关键词
Cage system; eco-friendly; single-point mooring (SPM); tension force; volume reduction coefficient; GRAVITY-TYPE CAGES; NET CAGE; AQUACULTURE; SIMULATION; DEFORMATION;
D O I
10.1109/JOE.2009.2015167
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In recent years, the development of single-point mooring (SPM) cage systems has attracted much attention due to its eco-friendly features. A numerical model of this cage system is developed to estimate the maximum tension force of mooring system and net-volume deformation under a typical 50-year return period of local sea state. The results show that the cage system with a rigid frame can improve the net-volume deformation significantly in comparison to its counterpart without a frame, but its mooring line tension will slightly increase. The study also illustrates that the maximum tension will rise linearly as the number of cages increases, but the net-volume reduction coefficient remains almost the same.
引用
收藏
页码:113 / 122
页数:10
相关论文
共 20 条
[1]  
BREBBIA CA, 1979, DYNAMIC ANAL OFFSHOR, P133
[2]   Observations on motions and loads in aquaculture cages from full scale and model scale measurements [J].
Colbourne, DB ;
Allen, JH .
AQUACULTURAL ENGINEERING, 2001, 24 (02) :129-148
[3]  
DEAN RG, 1984, WATER WAVE MECH ENG, P66
[4]   A case study of a modified gravity type cage and mooring system using numerical and physical models [J].
DeCew, J ;
Fredriksson, DW ;
Bugrov, L ;
Swift, MR ;
Eroshkin, O ;
Celikkol, B .
IEEE JOURNAL OF OCEANIC ENGINEERING, 2005, 30 (01) :47-58
[5]  
DSouza AF., 1984, Advanced Dynamics Modeling and Analysis, P78
[6]   Fish cage and mooring system dynamics using physical and numerical models with field measurements [J].
Fredriksson, DW ;
Swift, MR ;
Irish, JD ;
Tsukrov, I ;
Celikkol, B .
AQUACULTURAL ENGINEERING, 2003, 27 (02) :117-146
[7]   Mitigating the environmental effects of mariculture through single-point moorings (SPMs) and drifting cages [J].
Goudey, CA ;
Loverich, G ;
Kite-Powell, H ;
Costa-Pierce, BA .
ICES JOURNAL OF MARINE SCIENCE, 2001, 58 (02) :497-503
[8]   Effects of waves and currents on gravity-type cages in the open sea [J].
Huang, Chai-Cheng ;
Tang, Hung-He ;
Liu, Jin-Yuan .
AQUACULTURAL ENGINEERING, 2008, 38 (02) :105-116
[9]   Modeling volume deformation in gravity-type cages with distributed bottom weights or a rigid tube-sinker [J].
Huang, Chai-Cheng ;
Tang, Hung-Jie ;
Liu, Jin-Yuan .
AQUACULTURAL ENGINEERING, 2007, 37 (02) :144-157
[10]  
Huang CC, 2006, INT OFFSHORE POLAR E, P292