Novel High-Performance SynRM Design Method: An Easy Approach for A Complicated Rotor Topology

被引:160
作者
Moghaddam, Reza-Rajabi [1 ]
Gyllensten, Freddy [2 ]
机构
[1] ABB Corp Res, S-72178 Vasteras, Sweden
[2] ABB Motors & Generators, S-72170 Vasteras, Sweden
关键词
Optimization; synchronous reluctance; test; torque; torque ripple; SYNCHRONOUS RELUCTANCE MOTOR; TORQUE RIPPLE REDUCTION; OPTIMIZATION; INDUCTION;
D O I
10.1109/TIE.2013.2271601
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The complex rotor structure of the synchronous reluctance machine (SynRM) is analyzed in this paper. Three macroscopic design parameters are introduced: insulation ratios in the d- and q-axes and the rotor slot pitch in the d-axis controller angle. These parameters are optimally linked to the microscopic and detailed SynRM rotor geometry (barriers, insulation layer and segments, magnetic layers inside the rotor) parameters (dimensions) by introducing and combining a general rotor arrangement with an analytical explanatory theory. This theory represents the anisotropic behavior of the SynRM rotor structure according to the literature. Based on these parameters, a novel, simple, fast, and systematic design procedure for a SynRM rotor with specific stator structure is developed and presented. A SynRM rotor can be competitively optimized with respect to an induction machine (IM) by a limited number of finite-element-method sensitivity analysis studies of the macroscopic design parameters. The machine torque can be maximized by finding the best insulation ratios, while the torque ripple can be minimized by determining the best rotor slot pitch in the d-axis. Both these optimizations can be defined independently of the stator structure. The method is validated by the design (using this procedure), prototype, and measurement of a specific SynRM machine with three barriers and a stator standard frame size of 160 [International Electrotechnical Commission (IEC)]. A heat-run test was done for both the SynRM and its corresponding IM with the same stator and test bench.
引用
收藏
页码:5058 / 5065
页数:8
相关论文
共 56 条
[1]  
Alger P. L., 1951, NATURE POLYPHASE IMS
[2]  
[Anonymous], P POW EL APPL 2009 E
[3]   Accurate Modeling and Performance Analysis of IPM-PMASR Motors [J].
Armando, Eric ;
Guglielmi, Paolo ;
Pellegrino, Gianmario ;
Pastorelli, Michele ;
Vagati, Alfredo .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2009, 45 (01) :123-130
[4]   Permanent-Magnet Optimization in Permanent-Magnet-Assisted Synchronous Reluctance Motor for a Wide Constant-Power Speed Range [J].
Barcaro, Massimo ;
Bianchi, Nicola ;
Magnussen, Freddy .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2012, 59 (06) :2495-2502
[5]  
Bianchi N., 2006, 2006 37th IEEE Power Electronics Specialists Conference, P1, DOI DOI 10.1109/PESC.2006.1712039
[6]  
Bianchi N., 2004, IEEE IAS ANN M OCT
[7]   Torque harmonic compensation in a synchronous reluctance motor [J].
Bianchi, Nicola ;
Bolognani, Silverio ;
Bon, Diego ;
Pre, Michele Dai .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2008, 23 (02) :466-473
[8]   Rotor flux-barrier design for torque ripple reduction in synchronous reluctance motors [J].
Bianchi, Nicola ;
Bolognani, Silverio ;
Bon, Diego ;
Pre, Michele Dai .
CONFERENCE RECORD OF THE 2006 IEEE INDUSTRY APPLICATIONS CONFERENCE, FORTY-FIRST IAS ANNUAL MEETING, VOL 1-5, 2006, :1193-1200
[9]  
Boglietti A, 2005, IEEE IND APPLIC SOC, P474
[10]  
Boglietti Aldo, 2008, IECON 2008 - 34th Annual Conference of IEEE Industrial Electronics Society, P2041, DOI 10.1109/IECON.2008.4758270