Effect of pre-strain and reheating on isothermal α′ martensite formation in Fe-25.5Ni-4Cr austenitic steel

被引:1
作者
Nihei, Y [1 ]
Hiraoka, Y [1 ]
Kagaya, Y [1 ]
Kohno, Y [1 ]
Shibata, K [1 ]
Ohtsuka, H [1 ]
机构
[1] Muroran Inst Technol, Dept Mat Sci & Engn, Muroran, Hokkaido 0508585, Japan
关键词
D O I
10.1016/j.jnucmat.2004.04.097
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of pre-strain on alpha' martensitic transformation was examined for Fe-25.5Ni-4Cr austenitic steel. alpha' martensitic transformation was gradually suppressed with pre-strain up to about 10%, but was contrarily enhanced with pre-strain over about 10%. Specimens pre-strained to 10% and 30% were reheated to clarify the mechanism of suppression and enhancement on alpha' martensite formation. The diffusion activation energy of component atoms in this steel was obtained from the relation between the amount of alpha' martensite and the reheating time. In specimens pre-strained to 10%, the apparent activation energy is fairly close to the diffusion activation energy of C in austenitic steels. In specimens pre-strained to 30%, the apparent activation energy is close to the diffusion activation energy of Ni and Cr in austenitic steels. The suppression and enhancement of alpha' martensitic transformation is attributed to diffusion of C, Ni and Cr in Fe-25.5Ni-4Cr. (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码:648 / 651
页数:4
相关论文
共 50 条
[41]   TEM study of pre-strain's effect on shape recovery character in an Fe-Mn-Si-Cr-Ni shape memory alloy [J].
Zhixia, Qiao ;
Lianjin, Li ;
Dongai, Wang ;
Zongmin, Li .
INTERNATIONAL CONFERENCE ON SMART MATERIALS AND NANOTECHNOLOGY IN ENGINEERING, PTS 1-3, 2007, 6423
[42]   The Effect of the Pre-strain Process on the Mechanical Properties, Microstructure, Fatigue Life, and Fracture Mode of 304 Austenitic Stainless Steel [J].
Yuan, Zhe ;
Huo, Shihui .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (10) :4446-4455
[43]   The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr-9Mn-Ni-Cu stainless steel [J].
Kisko, A. ;
Misra, R. D. K. ;
Talonen, J. ;
Karjalainen, L. P. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 578 :408-416
[44]   Isothermal martensite formation in a magnetically ordered austenite phase of an Fe-32%Ni-0.4%Cr alloy [J].
Akturk, S ;
Guner, M ;
Aktas, H .
JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 387 (1-2) :279-281
[45]   Hydrogen embrittlement of catholically hydrogen-precharged 304L austenitic stainless steel: Effect of plastic pre-strain [J].
Wang, Yanfei ;
Wang, Xiaowei ;
Gong, Jianming ;
Shen, Limin ;
Dong, Weinan .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (25) :13909-13918
[46]   STRESS AND STRAIN INDUCED MARTENSITE IN A Fe-Ni-C STEEL: THERMODYNAMICS, KINETICS, MORPHOLOGY AND FORMATION MECHANISMS [J].
Hilders, O. A. .
ACTA MICROSCOPICA, 2013, 22 (04) :328-365
[47]   Effect of pre-strain and ratcheting strain on fatigue and creep-fatigue lives in Mod.9Cr-1Mo steel [J].
Ando, Masanori ;
Isobe, Nobuhiro ;
Date, Shingo ;
Kikuchi, Koichi ;
Enuma, Yasuhiro .
Zairyo/Journal of the Society of Materials Science, Japan, 2012, 61 (04) :377-384
[48]   Effect of copper addition on tensile behavior in Fe-Cr-Ni stable austenitic stainless steel [J].
Cho, Hyung-Jun ;
Kim, Sung-Ho ;
Cho, Yeonggeun ;
Kim, Sung-Joon .
MATERIALS CHARACTERIZATION, 2022, 190
[49]   Effect of copper addition on tensile behavior in Fe-Cr-Ni stable austenitic stainless steel [J].
Cho, Hyung-Jun ;
Kim, Sung-Ho ;
Cho, Yeonggeun ;
Kim, Sung-Joon .
Materials Characterization, 2022, 190
[50]   Prediction of carbide free layer formation in Fe-Ni-Cr austenitic steel process heater tube [J].
Das, S. K. ;
Ghosh, R. N. ;
Sondhi, S. .
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2012, 47 (02) :121-124