Micro structure-based constitutive modeling of TRIP steel: Prediction of ductility and failure modes under different loading conditions

被引：142
作者：
Choi, K. S. [1 ]
Liu, W. N. [1 ]
Sun, X. [1 ]
Khaleel, M. A. [1 ]
机构：
[1] Pacific NW Natl Lab, Richland, WA 99352 USA
来源：
ACTA MATERIALIA | 2009年 / 57卷 / 08期
关键词：
Ductility; Finite-element analysis (FEA); Martensitic phase transformation; TRIP steel; X-ray diffraction (XRD); TRANSFORMATION-INDUCED PLASTICITY; INDUCED MARTENSITIC-TRANSFORMATION; ASSISTED MULTIPHASE STEELS; FINITE-ELEMENT-ANALYSIS; DEFORMATION-BEHAVIOR; MULTISCALE MECHANICS; FRACTURE; STRAIN; PHASE; MICROSTRUCTURE;
D O I：
10.1016/j.actamat.2009.02.020
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
We Study the ultimate ductility and failure modes of a commercial transformation-induced plasticity (TRIP) 800 steel under different loading conditions with an advanced microstructure-based finite-element analysis. The representative Volume element (RVE) for the TRIP 800 under examination is developed based oil an actual microstructure obtained from scanning electron microscopy. The ductile failure of the TRIP 800 Under different loading conditions is predicted in (lie form of plastic strain localization without any prescribed failure criteria for the individual phases. This indicates that the microstructure-level inhomogeneity of the various constituent phases can be the key factor influencing the final ductility of the TRIP 800 Steel Under different loading, conditions. Comparisons of the computational results With experimental measurements suggest that the microstructure-based modeling approach accurately captures the overall macroscopic behavior of the TRIP 800 steel Under different loading and boundary conditions. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：2592 / 2604
页数：13
相关论文
共 49 条
  • [21] MODELING TENSILE DEFORMATION OF DUAL-PHASE STEEL
    KIM, CM
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1988, 19 (05): : 1263 - 1268
  • [22] KONIECZNY AA, 2003, SEM GREAT DES STEELS
  • [23] Multiscale mechanics of TRIP-assisted multiphase steels:: II.: Micromechanical modelling
    Lani, F.
    Furnemont, Q.
    Van Rompaey, T.
    Delannay, F.
    Jacques, P. J.
    Pardoen, T.
    [J]. ACTA MATERIALIA, 2007, 55 (11) : 3695 - 3705
  • [24] LEAL RH, 1984, THESIS MIT CAMBRIDGE
  • [25] FORMATION OF SHEAR BANDS IN PLANE SHEET
    LI, GC
    ZHU, C
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 1995, 11 (05) : 605 - 622
  • [26] LI Y, 2008, INT J PLASTICITY, DOI DOI 10.1016/J.IJPLAS.2008.07.00
  • [27] Marciniak Z., 1967, INT J MECH SCI, V9, P609, DOI [DOI 10.1016/0020-7403(67)90066-5, 10.1016/0020-7403(67)90066-5]
  • [28] MARKETZ F, 1994, COMP MATER SCI, V3, P307, DOI 10.1016/0927-0256(94)90146-5
  • [29] A CRITERION FOR DUCTILE FRACTURE BY GROWTH OF HOLES
    MCCLINTOCK, FA
    [J]. JOURNAL OF APPLIED MECHANICS, 1968, 35 (02): : 363 - +
  • [30] KINETICS OF STRAIN-INDUCED MARTENSITIC NUCLEATION
    OLSON, GB
    COHEN, M
    [J]. METALLURGICAL TRANSACTIONS, 1975, A 6 (04): : 791 - 795
12345