Some Aspects Regarding Micro-scale EDM Drilling Process

被引：1
|
作者：
Dodun, Oana [1 ]
Panaite, Carmen Ema [2 ]
Gherman, Lorelei [1 ]
机构：
[1] Tech Univ Gheorghe Asachi Iasi, Dept Machine Mfg, 59 A,D Mangeron Blvd, Iasi 700050, Romania
[2] Tech Univ Gheorghe Asachi Iasi, Dept Mech Engn & Automot, 59 A,D Mangeron Blvd, Iasi 700050, Romania
来源：
INNOVATIVE MANUFACTURING ENGINEERING | 2013年 / 371卷
关键词：
electrical discharge machining; micromachining; hole drilling; material removal rate; electrode wear rate; accuracy;
D O I：
10.4028/www.scientific.net/AMM.371.285
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Electrical discharge machining is the most extensively non-conventional machining process used to obtain complicated shapes with high accuracy in a wide variety of materials. In this paper, the results of an experimental approach performed to deepen understanding of the complex micro-EDM drilling process and the shape of the obtained micro-hole are presented. The experiments were conducted by using a Sodick A3DL ram electrical discharge machine using Cooper and Graphite tool electrodes of different diameters. The effectiveness of the EDM process was evaluated in terms of the material removal rate (MRR) and electrode wear ratio (EWR).
引用
收藏
页码：285 / +
页数：2
相关论文
共 50 条
  • [31] Focus stacking photogrammetry for micro-scale roughness reconstruction: a methodological study
    Olkowicz, Marcin
    Dabrowski, Marcin
    Pluymakers, Anne
    PHOTOGRAMMETRIC RECORD, 2019, 34 (165) : 11 - 35
  • [32] High aspect ratio micro-hole drilling aided with ultrasonic vibration and planetary movement of electrode by micro-EDM
    Yu, Z. Y.
    Zhang, Y.
    Li, J.
    Luan, J.
    Zhao, F.
    Guo, D.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (01) : 213 - 216
  • [33] Dual-stage artificial neural network (ANN) model for sequential LBMM-μEDM-based micro-drilling
    Noor, Wazed Ibne
    Saleh, Tanveer
    Rashid, Mir Akmam Noor
    Ibrahim, Azhar Mohd
    Ali, Mohamed Sultan Mohamed
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (11-12) : 3343 - 3365
  • [34] Micro Drilling EDM with High Rotation Speed of Tool Electrode Using the Electrostatic Induction Feeding Method
    Yahagi, Yuna
    Koyano, Tomohiro
    Kunieda, Masanori
    Yang, Xiaodong
    FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 162 - 165
  • [35] A study on the optimal fabrication method for micro-scale gyroscopes using a hybrid process consisting of electric discharge machining, chemical etching or micro-mechanical milling
    Fonda, Peter
    Nakamoto, Kazuo
    Heidari, Amir
    Yang, Hsueh-An
    Horsley, David A.
    Lin, Liwei
    Yamazaki, Kazuo
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2013, 62 (01) : 183 - 186
  • [36] Suitability of open-access elevation models for micro-scale watershed planning
    Altunel, Arif Oguz
    ENVIRONMENTAL MONITORING AND ASSESSMENT, 2018, 190 (09)
  • [37] Some Aspects of the Application of the Hole Drilling Method on Plastic Materials
    Magnier, Arnaud
    Nau, Andreas
    Scholtes, Berthold
    RESIDUAL STRESS, THERMOMECHANICS & INFRARED IMAGING, HYBRID TECHNIQUES AND INVERSE PROBLEMS, VOL 9, 2016, : 371 - 380
  • [38] Effects of some process parameters on the impulse force in single pulsed EDM
    Zhang, Min
    Zhang, Qinhe
    Zhu, Guang
    Liu, Qingyu
    Zhang, Jianhua
    18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII), 2016, 42 : 627 - 631
  • [39] Tool Wear and Material Removal Predictions in Micro-EDM Drilling: Advantages of Data-Driven Approaches
    Bellotti, Mattia
    Wu, Ming
    Qian, Jun
    Reynaerts, Dominiek
    APPLIED SCIENCES-BASEL, 2020, 10 (18):
  • [40] Recent trends, opportunities and other aspects of micro-EDM for advanced manufacturing: a comprehensive review
    Deepak Kumar
    Nirmal Kumar Singh
    Vivek Bajpai
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42
12345