Influence of Al-Si alloy microstructure on the corrosion resistance of coatings formed by the microarc oxidation method

被引：1
|
作者：
Dudareva, Natalia Y. [1 ]
Kalschikov, Roman V. [1 ]
Zaynullina, Liliya I. [1 ]
机构：
[1] Ufa State Aviat Tech Univ, Ufa, Russia
来源：
INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2017) | 2017年 / 129卷
关键词：
CERAMIC COATINGS; ARC OXIDATION; OXIDE LAYER;
D O I：
10.1051/matecconf/201712902016
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The impact of the high-silicon aluminum alloy initial microstructure on the quality of the coating formed by microarc oxidation (MAO) has been studied. The MAO treatment is applied to AK12D samples in the initial coarse-grained state and after high pressure torsion. The following coating properties are studied: thickness, microhardness, porosity and corrosion resistance. It is established that the MAO layers properties depend on the base microstructure much. High pressure torsion applied to AK12D samples before MAO results in increase of the coating thickness by similar to 2 times. The microhardness of coatings reduces and their corrosion resistance degrades by similar to 10 times.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] The influence of liquid extrusion on the microstructure and properties of an Al-Si alloy
    Qi, LH
    MATERIALS AND MANUFACTURING PROCESSES, 1998, 13 (03) : 405 - 413
  • [32] Influence of the extrusion parameters on the microstructure and properties of an Al-Si alloy
    Pyzalla, A
    Müller, KB
    Wegener, J
    ZEITSCHRIFT FUR METALLKUNDE, 2000, 91 (10): : 831 - 837
  • [33] Influence of Laser Coating on Microstructure and Properties of an Al-Si Alloy
    李玉龙
    胡建东
    连建设
    吕健
    Journal of Materials Science & Technology, 1992, (03) : 214 - 218
  • [34] Influence of the Extrusion Parameters on the Microstructure and Properties of an Al-Si Alloy
    Pyzalla, A.
    Müller, K.B.
    Wegener, J.
    International Journal of Materials Research, 2000, 91 (10) : 831 - 837
  • [35] Influence of laser coating on microstructure and properties of Al-Si alloy
    Li, Yulong
    Hu, Jiandong
    Lian, Jianshe
    Lu, Jian
    Chinese Journal of Metal Science & Technology, 1992, 8 (03): : 214 - 218
  • [36] Interface adhesion properties of functional coatings on titanium alloy formed by microarc oxidation method
    Wang, Y. M.
    Guo, L. X.
    Ouyang, J. H.
    Zhou, Y.
    Jia, D. C.
    APPLIED SURFACE SCIENCE, 2009, 255 (15) : 6875 - 6880
  • [37] Microstructure and phase composition of microarc oxidation coatings formed on Ti-6Al-4V alloy in aluminate solution
    Xue, W
    Deng, Z
    Ma, H
    Chen, R
    Zhang, T
    SURFACE ENGINEERING, 2001, 17 (04) : 323 - 326
  • [38] Effects of voltage on the characteristics and corrosion resistance of microarc oxidation coatings on Ti6Al4V alloy
    Hu, Zongchun
    Xie, Faqin
    Wu, Xiangqing
    MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5, 2010, 97-101 : 1336 - 1339
  • [39] Growth regularity of ceramic coatings formed by microarc oxidation on Al-Cu-Mg alloy
    Xue, WB
    Deng, ZW
    Chen, RY
    Zhang, TH
    THIN SOLID FILMS, 2000, 372 (1-2) : 114 - 117
  • [40] Transient temperatures and microstructure of spray formed aluminium alloy Al-Si sheets
    Achelis, L.
    Uhlenwinkel, V.
    Ristau, R.
    Krug, P.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2010, 41 (07) : 498 - 503
12345