Effect of over tempering at UHSLA Steel ARMOX 500

被引:6
作者
Barenyi, Igor [1 ]
Liptak, Peter [1 ]
Vojtovic, Sergej [1 ]
机构
[1] Alexander Dubcek Univ Trencin, Fac Special Technol, Trencin 91106, Slovakia
来源
MATERIALS RESEARCH AND APPLICATIONS, PTS 1-3 | 2014年 / 875-877卷
关键词
UHSLA steel; ARMOX; secondary processing; mechanical properties; heat treatment;
D O I
10.4028/www.scientific.net/AMR.875-877.1324
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
ARMOX steels are armored steels used for protect devices and facilities against blasts and explosions. Due to this purpose the ARMOX 500 steel has excellent mechanical properties as are high hardness, tensile strength and good toughness. These properties result from specific production process finished with rolling ant then quenching and tempering. The producer of ARMOX steels recommend their secondary processing (cutting, welding, shaping) at temperatures lower than 200 C due to over tempering and degradation of mechanical properties in heat affected areas. The paper describes the mechanism and reason of this degradation including the simulation of cooling process with ARMOX 500 steel.
引用
收藏
页码:1324 / 1328
页数:5
相关论文
共 5 条
[1]  
HIRES O., 2011, VYSKUMNA SPRAVA
[2]  
KULMANN N.A., 2011, METALLURGICAL CHARAC
[3]  
SKOCOVSKY P., 2006, NAUKO MAT PRE ODBORY
[4]  
SSAB OXELOSUND SWEDEN, 2011, DAT ARM 500
[5]  
SSAB OXELOSUND SWEDEN, 2008, STEEL BOOK