Investigation of two-phase Mg-Gd-Ni alloys with highly stable long period stacking ordered phases

被引:34
作者
Yin, Jian [1 ]
Lu, Chunhui [1 ]
Ma, Xiujun [1 ]
Dai, Binyu [1 ]
Chen, Hai-lin [2 ]
机构
[1] Nanchang Hangkong Univ, Sch Aeronaut Mfg Engn, Nanchang 330063, Peoples R China
[2] Thermocalc Software AB, SE-11364 Stockholm, Sweden
基金
中国国家自然科学基金;
关键词
Intermetallics; Alloy design; Thermal stability; Heat treatment; Microstructure; MECHANICAL-PROPERTIES; ZN; MICROSTRUCTURE; EQUILIBRIA; STRENGTH; TRANSFORMATION; STABILITY; 18R; 14H;
D O I
10.1016/j.intermet.2015.09.006
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The effects of the Ni addition on the microstructures of Mg-2Gd-xNi (at.%, x = 0, 0.25, 0.5 and 1) alloys were systematically investigated. A series of two-phase Mg-Gd-Ni alloys consisting of long period stacking ordered (LPSO) phase and alpha-Mg were obtained. The LPSO phase presented block-like shape and was distributed between alpha-Mg dendrite arms. Its volume fraction was found to be proportional to the Ni content, ranging from 0 to similar to 40% with the Ni content increasing from 0 to 1 at.%. After a heat treatment at 500 degrees C for 100 h, the LPSO phase experienced a structure transformation from 18R to 14H but was hardly dissolved into the a-Mg matrix, which evidenced a high thermal stability. The mechanism for the effects of the Ni addition on the formation of the LPSO phase was discussed. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:63 / 70
页数:8
相关论文
共 29 条
[1]   Effects of yttrium and zinc addition on the microstructure and mechanical properties of Mg-Y-Zn alloys [J].
Chen, Bin ;
Lin, Dongliang ;
Zeng, Xiaoqin ;
Lu, Chen .
JOURNAL OF MATERIALS SCIENCE, 2010, 45 (09) :2510-2517
[2]   The role of extrusion texture on strength and its anisotropy in a Mg-base alloy composed of the Long-Period-Structural-Order phase [J].
Garces, G. ;
Munoz-Morris, M. A. ;
Morris, D. G. ;
Jimenez, J. A. ;
Perez, P. ;
Adeva, P. .
INTERMETALLICS, 2014, 55 :167-176
[3]   Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy [J].
Hagihara, K. ;
Kinoshita, A. ;
Sugino, Y. ;
Yamasaki, M. ;
Kawamura, Y. ;
Yasuda, H. Y. ;
Umakoshi, Y. .
ACTA MATERIALIA, 2010, 58 (19) :6282-6293
[4]   A high-strength Mg-Ni-Y alloy sheet with a long-period ordered phase prepared by hot-rolling [J].
Itoi, T. ;
Takahashi, K. ;
Moriyama, H. ;
Hirohashi, M. .
SCRIPTA MATERIALIA, 2008, 59 (10) :1155-1158
[5]   Long period stacking structures observed inMg97Zn1Y2 alloy [J].
Itoi, T ;
Seimiya, T ;
Kawamura, Y ;
Hirohashi, M .
SCRIPTA MATERIALIA, 2004, 51 (02) :107-111
[6]   Phase equilibria of the long-period stacking ordered phase in the Mg-Ni-Y system [J].
Jiang, Min ;
Zhang, Shuai ;
Bi, Yuandong ;
Li, Hongxiao ;
Ren, Yuping ;
Qin, Gaowu .
INTERMETALLICS, 2015, 57 :127-132
[7]   The phase equilibria and thermal stability of the long-period stacking ordered phase in the Mg-Cu-Y system [J].
Jiang, Min ;
Su, Xiulan ;
Li, Hongxiao ;
Ren, Yuping ;
Qin, Gaowu .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 593 :141-147
[8]   Formation of long-period stacking ordered structures in Mg88M5Y7 (M = Ti, Ni and Pb) casting alloys [J].
Jin, Qian-Qian ;
Fang, Can-Feng ;
Mi, Shao-Bo .
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 568 :21-25
[9]   Rapidly solidified powder metallurgy Mg97Zn1Y2Alloys with excellent tensile yield strength above 600 MPa [J].
Kawamura, Y ;
Hayashi, K ;
Inoue, A ;
Masumoto, T .
MATERIALS TRANSACTIONS, 2001, 42 (07) :1172-1176
[10]   Formation and mechanical properties of Mg97Zn1RE2 alloys with long-period stacking ordered structure [J].
Kawamura, Yoshihito ;
Yamasaki, Michiaki .
MATERIALS TRANSACTIONS, 2007, 48 (11) :2986-2992