Microstructure and Material Properties of Ti-15mass%Nb Alloy after Gas Nitriding and Quenching Process

The alpha ' martensite of Ti-15mass%Nb alloy exhibits high internal friction with high damping properties. However, its structure is smoother than the alpha + beta structure. Therefore, a hardened surface layer is required for abrasion resistance. This study fabricated a martensite structure inside the nitriding layer by quenching, after gas nitriding at 1023 and 1223 K. Vickers hardness test, X-ray diffraction, scanning electron microscopy (SEM), and SEM-energy dispersive X-ray (SEM-EDX) measurements from the surface to the inside were made after the heat treatment process. In addition, the Young's modulus and internal friction were calculated from the damping analysis. The alpha-TiN0.3 and beta phase region was formed at approximately 80 mu m from the surface at 1023 and 1223 K, and it was hardened. The internal friction of the gas nitriding and quenching specimens at 1023 and 1223 K was relatively high, though it did not reach that of the as-quenched specimen owing to the influence of the surface structure. From these results, it is considered that these material property values of the alloy can be controlled using the nitriding and quenching processes.