Reliability of tin-lead balled BGAs soldered with lead-free solder paste

被引：13
作者：
Nurmi, ST [1 ]
Ristolainen, EO [1 ]
机构：
[1] Tampere Univ Technol, Elect Lab, FIN-33101 Tampere, Finland
来源：
SOLDERING & SURFACE MOUNT TECHNOLOGY | 2002年 / 14卷 / 02期
关键词：
lead-free; temperature cycling; ball grid array;
D O I：
10.1108/09540910210427808
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper will describe tests of the interconnect reliability of BGA components with tin-lead bumps soldered with lead-free solder paste during temperature cycling. Tin-lead BGA components soldered with tin-lead solder paste and lead-free BGA components soldered with lead-free solder paste were used as a reference. The lead-free solder used was eutectic tin-silver-copper, Two kinds of surface finishes were used on the printed circuit boards (PCB), an immersion gold over electroless nickel and an organic solderability preservative. The test PCBs were temperature-cycled for 2500 cycles in the range of - 40degreesC to + 125degreesC and they were continuously electrically monitored during the cycling. The results of the temperature cycling test showed that lead-containing BGA components soldered with lead-free solder paste don't show any serious reliability risks and can actually withstand temperature cycling stresses better than entirely lead-free BGA assemblies.
引用
收藏
页码：35 / 39
页数：5
相关论文
共 50 条
  • [41] Hygrothermal delarninations in lead-free solder reflow of electronic packages
    Lam, D. C. C.
    Wang, J.
    JOURNAL OF ELECTRONIC MATERIALS, 2007, 36 (03) : 226 - 231
  • [42] Component candidacy of second side reflow with lead-free solder
    Liu, Yueli
    Geiger, David A.
    Shangguan, Dongkai
    MATERIALS TRANSACTIONS, 2006, 47 (06) : 1577 - 1583
  • [43] Surface mount assembly evaluations with lead-free solder pastes
    Bath, J
    Crombez, E
    ADVANCED ELECTRONICS ASSEMBLY - A SYMPOSIUM ON LEAD FREE INTERCONNECT TECHNOLOGY, PROCEEDINGS OF THE TECHNICAL PROGRAM, 2000, : 88 - 97
  • [44] Hygrothermal Delaminations in Lead-Free Solder Reflow of Electronic Packages
    D.C.C. Lam
    J. Wang
    Journal of Electronic Materials, 2007, 36 : 226 - 231
  • [45] Understanding the process window for printing lead-free solder pastes
    Nguty, TA
    Salam, B
    Durairaj, R
    Ekere, NN
    IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2001, 24 (04): : 249 - 254
  • [46] The development of assembly technology for lead-free low temperature solder
    Yamamoto, T
    Seyama, K
    Yagi, H
    Higashi, O
    Kanda, T
    2000 HD INTERNATIONAL CONFERENCE ON HIGH-DENSITY INTERCONNECT AND SYSTEMS PACKAGING, 2000, 4217 : 269 - 273
  • [47] Microstructure, isothermal and thermomechanical fatigue behaviour of leaded and lead-free solder joints
    Ghaleeh, Mohammad
    Baroutaji, Ahmad
    Al Qubeissi, Mansour
    ENGINEERING FAILURE ANALYSIS, 2020, 117
  • [48] Preparation and rheological behavior of lead-free graphite conducting paste
    Luo Shiyong
    Xu Wencai
    Wang Ning
    Chen Meng
    Lv Yong
    Journal of Coatings Technology and Research, 2013, 10 : 769 - 774
  • [49] Preparation and rheological behavior of lead-free graphite conducting paste
    Luo Shiyong
    Xu Wencai
    Wang Ning
    Chen Meng
    Lv Yong
    JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, 2013, 10 (06) : 769 - 774
  • [50] Life-cycle impacts of lead and lead-free solder used in wave soldering of electronics
    Socolof, ML
    Geibig, JR
    2005 IEEE INTERNATIONAL SYMPOSIUM ON ELECTRONICS & THE ENVIRONMENT, CONFERENCE RECORD, 2005, : 96 - 101
12345