Reliability of tin-lead balled BGAs soldered with lead-free solder paste

被引：13
|
作者：
Nurmi, ST [1 ]
Ristolainen, EO [1 ]
机构：
[1] Tampere Univ Technol, Elect Lab, FIN-33101 Tampere, Finland
来源：
SOLDERING & SURFACE MOUNT TECHNOLOGY | 2002年 / 14卷 / 02期
关键词：
lead-free; temperature cycling; ball grid array;
D O I：
10.1108/09540910210427808
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper will describe tests of the interconnect reliability of BGA components with tin-lead bumps soldered with lead-free solder paste during temperature cycling. Tin-lead BGA components soldered with tin-lead solder paste and lead-free BGA components soldered with lead-free solder paste were used as a reference. The lead-free solder used was eutectic tin-silver-copper, Two kinds of surface finishes were used on the printed circuit boards (PCB), an immersion gold over electroless nickel and an organic solderability preservative. The test PCBs were temperature-cycled for 2500 cycles in the range of - 40degreesC to + 125degreesC and they were continuously electrically monitored during the cycling. The results of the temperature cycling test showed that lead-containing BGA components soldered with lead-free solder paste don't show any serious reliability risks and can actually withstand temperature cycling stresses better than entirely lead-free BGA assemblies.
引用
收藏
页码：35 / 39
页数：5
相关论文
共 50 条
  • [21] On the shear properties of a lead-tin and a lead-free solder
    Siow, KS
    Manoharan, M
    PROCESSING AND FABRICATION OF ADVANCED MATERIALS VI, VOLS 1 & 2, 1998, : 383 - 394
  • [22] Detection of Solder Joint Failure Precursors on Tin-Lead and Lead-Free Assemblies using RF Impedance Analysis
    Kwon, Daeil
    Azarian, Michael H.
    Pecht, Michael
    2009 IEEE 59TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE, VOLS 1-4, 2009, : 663 - 667
  • [23] Solder paste with polymerizing flux for lead-free solder alloy
    Nishina, T
    Okamoto, K
    2001 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, PROCEEDINGS, 2001, 4587 : 535 - 540
  • [24] Accelerated reliability tests of lead-free soldered joints
    Drozd, Z
    Bronowski, J
    Drozd, J
    Szwech, M
    INFORMACIJE MIDEM-JOURNAL OF MICROELECTRONICS ELECTRONIC COMPONENTS AND MATERIALS, 2005, 35 (04): : 221 - 227
  • [25] Reliability of solder joints assembled with lead-free solder
    Ochiai, Masayuki
    Akamatsu, Toshiya
    Ueda, Hidefumi
    2002, Fujitsu Ltd (38):
  • [26] Reliability of solder joints assembled with lead-free solder
    Ochiai, M
    Akamatsu, T
    Ueda, H
    FUJITSU SCIENTIFIC & TECHNICAL JOURNAL, 2002, 38 (01): : 96 - 101
  • [27] LEAD-FREE SOLDER PASTE SELECTION AND SOLDER JOINT RELIABILITY FOR COPPER STUD FLIP CHIP
    Wen, Fon Bih
    Krishnan, Shutesh
    Chan, Yo Meng
    2008 EMAP CONFERENCE PROCEEDINGS, 2008, : 80 - 83
  • [28] Microstructure evolution of tin-lead solder
    Ubachs, RLJM
    Schreurs, PJG
    Geers, MGD
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2004, 27 (04): : 635 - 642
  • [29] Investigation of Rheology Behavior of Lead-free Solder Paste
    Wang, Yanqing
    Xu, Xiaoyan
    Zhou, Jian
    Xue, Feng
    2015 16TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, 2015,
  • [30] Reliability of lead-free solder interconnects - A review
    Tonapi, S
    Gopakumar, S
    Borgesen, P
    Srihari, K
    ANNUAL RELIABILITY AND MAINTAINABILITY SYMPOSIUM, 2002 PROCEEDINGS, 2002, : 423 - 428
12345