Adhesion of 3D printing polymers on textile fabrics for garment production

被引：39

作者：

Spahiu, T. ^{[1
]}

Al-Arabiyat, M. ^{[2
]}

Martens, Y. ^{[2
]}

Ehrmann, A. ^{[2
]}

Piperi, E. ^{[3
]}

Shehi, E. ^{[1
]}

机构：

[1] Polytech Univ Tirana, Fac Mech Engn, Text & Fash Dept, Mother Tereza Sq 1, Tirana, Albania

[2] Bielefeld Univ Appl Sci, Fac Engn & Math, ITES, Interakt 1, D-33619 Bielefeld, Germany

[3] Polytech Univ Tirana, Fac Mech Engn, Dept Prod & Management, Mother Tereza Sq 1, Tirana, Albania

来源：

AEGEAN INTERNATIONAL TEXTILE AND ADVANCED ENGINEERING CONFERENCE (AITAE 2018) | 2018年 / 459卷

关键词：

D O I：

10.1088/1757-899X/459/1/012065

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Applications of 3D printing in fashion industry are numerous, including 3D printing geometries on textile fabrics, printing parts of the garments, or even the entire garment. A crucial point of making such polymer/textile combinations usable is the adhesion between both materials. Investigations related to this adhesion, however, are still scarce. Similarly, the influence of 3D printed patterns on the geometries and the mechanical parameters of textile fabrics are only rarely examined. Continuing our previous research, the experiments shown here illustrate the influence of different printing parameters on the adhesion between fabrics and 3D printing polymer. These results will support other researchers as well as fashion designers in developing new 3D garment shapes by combining common textile fabrics with the relatively new possibility of 3D printing.

引用

页数：6

共 8 条

[1] Adhesion of 3D printed material on textile substrates [J].