Machine Learning Prediction Models to Evaluate the Strength of Recycled Aggregate Concrete

被引:74
作者
Yuan, Xiongzhou [1 ]
Tian, Yuze [2 ]
Ahmad, Waqas [3 ]
Ahmad, Ayaz [3 ,4 ]
Usanova, Kseniia Iurevna [5 ]
Mohamed, Abdeliazim Mustafa [6 ,7 ]
Khallaf, Rana [8 ]
机构
[1] Shenzhen Inst Informat Technol, Sch Traff & Environm, Shenzhen 518172, Peoples R China
[2] Univ Sci & Technol Liaoning, Sch Civil Engn, Anshan 114051, Peoples R China
[3] COMSATS Univ Islamabad, Dept Civil Engn, Abbottabad 22060, Pakistan
[4] Natl Univ Ireland, Ryan Inst, Sch Engn, Coll Sci & Engn,MaREI Ctr, Galway H91 TK33, Ireland
[5] Peter Great St Petersburg Polytech Univ, St Petersburg 195291, Russia
[6] Prince Sattam Bin Abdulaziz Univ, Coll Engn Al Kharj, Dept Civil Engn, Al Kharj 11942, Saudi Arabia
[7] Bayan Coll Sci & Technol, Bldg & Construct Technol Dept, Khartoum 11115, Sudan
[8] Future Univ Egypt, Fac Engn & Technol, Struct Engn & Construct Management, New Cairo 11845, Egypt
关键词
recycled aggregate concrete; sustainable aggregate; compressive strength; flexural strength; gradient boosting; random forest; ARTIFICIAL NEURAL-NETWORK; MECHANICAL-PROPERTIES; COMPRESSIVE STRENGTH; FLY-ASH; ENGINEERING PROPERTIES; HARDENED PROPERTIES; FATIGUE BEHAVIOR; DRYING SHRINKAGE; COARSE AGGREGATE; CEMENT ADDITION;
D O I
10.3390/ma15082823
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Compressive and flexural strength are the crucial properties of a material. The strength of recycled aggregate concrete (RAC) is comparatively lower than that of natural aggregate concrete. Several factors, including the recycled aggregate replacement ratio, parent concrete strength, water-cement ratio, water absorption, density of the recycled aggregate, etc., affect the RAC's strength. Several studies have been performed to study the impact of these factors individually. However, it is challenging to examine their combined impact on the strength of RAC through experimental investigations. Experimental studies involve casting, curing, and testing samples, for which substantial effort, price, and time are needed. For rapid and cost-effective research, it is critical to apply new methods to the stated purpose. In this research, the compressive and flexural strengths of RAC were predicted using ensemble machine learning methods, including gradient boosting and random forest. Twelve input factors were used in the dataset, and their influence on the strength of RAC was analyzed. The models were validated and compared using correlation coefficients (R-2), variance between predicted and experimental results, statistical tests, and k-fold analysis. The random forest approach outperformed gradient boosting in anticipating the strength of RAC, with an R-2 of 0.91 and 0.86 for compressive and flexural strength, respectively. The models' decreased error values, such as mean absolute error (MAE) and root-mean-square error (RMSE), confirmed the higher precision of the random forest models. The MAE values for the random forest models were 4.19 MPa and 0.56 MPa, whereas the MAE values for the gradient boosting models were 4.78 MPa and 0.64 MPa, for compressive and flexural strengths, respectively. Machine learning technologies will benefit the construction sector by facilitating the evaluation of material properties in a quick and cost-effective manner.
引用
收藏
页数:25
相关论文
共 121 条
[1]   Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete [J].
Abd Elhakam, Ali ;
Mohamed, Abd Elmoaty ;
Awad, Eslam .
CONSTRUCTION AND BUILDING MATERIALS, 2012, 35 :421-427
[2]   Compressive strength prediction of fly ash-based geopolymer concrete via advanced machine learning techniques [J].
Ahmad, Ayaz ;
Ahmad, Waqas ;
Aslam, Fahid ;
Joyklad, Panuwat .
CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 16
[3]   Compressive Strength Prediction via Gene Expression Programming (GEP) and Artificial Neural Network (ANN) for Concrete Containing RCA [J].
Ahmad, Ayaz ;
Chaiyasarn, Krisada ;
Farooq, Furqan ;
Ahmad, Waqas ;
Suparp, Suniti ;
Aslam, Fahid .
BUILDINGS, 2021, 11 (08)
[4]   Comparative Study of Supervised Machine Learning Algorithms for Predicting the Compressive Strength of Concrete at High Temperature [J].
Ahmad, Ayaz ;
Ostrowski, Krzysztof Adam ;
Maslak, Mariusz ;
Farooq, Furqan ;
Mehmood, Imran ;
Nafees, Afnan .
MATERIALS, 2021, 14 (15)
[5]   Prediction of Compressive Strength of Fly Ash Based Concrete Using Individual and Ensemble Algorithm [J].
Ahmad, Ayaz ;
Farooq, Furqan ;
Niewiadomski, Pawel ;
Ostrowski, Krzysztof ;
Akbar, Arslan ;
Aslam, Fahid ;
Alyousef, Rayed .
MATERIALS, 2021, 14 (04) :1-21
[6]   Application of Advanced Machine Learning Approaches to Predict the Compressive Strength of Concrete Containing Supplementary Cementitious Materials [J].
Ahmad, Waqas ;
Ahmad, Ayaz ;
Ostrowski, Krzysztof Adam ;
Aslam, Fahid ;
Joyklad, Panuwat ;
Zajdel, Paulina .
MATERIALS, 2021, 14 (19)
[7]   A scientometric review of waste material utilization in concrete for sustainable construction [J].
Ahmad, Waqas ;
Ahmad, Ayaz ;
Ostrowski, Krzysztof Adam ;
Aslam, Fahid ;
Joyklad, Panuwat .
CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 15
[8]   Influence of recycled aggregates on mechanical properties of HS/HPC [J].
Ajdukiewicz, A ;
Kliszczewicz, A .
CEMENT & CONCRETE COMPOSITES, 2002, 24 (02) :269-279
[9]   Comparative tests of beams and columns made of recycled aggregate concrete and natural aggregate concrete [J].
Ajdukiewicz, Andrzej B. ;
Kliszczewicz, Alina T. .
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2007, 5 (02) :259-273
[10]   Multigene Expression Programming Based Forecasting the Hardened Properties of Sustainable Bagasse Ash Concrete [J].
Amin, Muhammad Nasir ;
Khan, Kaffayatullah ;
Aslam, Fahid ;
Shah, Muhammad Izhar ;
Javed, Muhammad Faisal ;
Musarat, Muhammad Ali ;
Usanova, Kseniia .
MATERIALS, 2021, 14 (19)