On the relaxation of the long-range internal stresses of deformed copper upon unloading

Single and polycrystalline samples of Cu were deformed at a constant shear stress of 1.43 x 10(-3) G (G, shear modulus). At room temperature deformation ceases owing to work hardening after formation of a cell structure; at 527 K a steady state of deformation is reached with formation of a subgrain structure which is frozen in by cooling to room temperature at constant load. The dislocation density and the internal stresses were determined by analyzing the 200 Bragg peaks measured with high resolution. Measurements under load show broadening of the peaks by deformation owing to an increase of dislocation density and a build-up of long-range internal stresses. Subsequent removal of the load causes the dislocation density to decrease by 17-30%, and the internal forward stress in the hard regions of concentrated stress to decrease by one-third. It is concluded that the factor of average stress concentration in hard regions is about 2 in the work hardened state at room temperature as well as in the steady-state deformation at 527 K. (C) 2000 Published by Elsevier Science S.A. All rights reserved.