Performance of a novel cold thermal storage material in an emulated air conditioning system using different storage strategies

被引:29
作者
Wang, Xiaolin [1 ]
Dennis, Mike [1 ]
Jiang, Jiajia [1 ]
Zho, Lei [2 ]
Zhai, Xiaoqiang [3 ]
Lipinski, Wojciech [1 ]
机构
[1] Australian Natl Univ, Res Sch Elect Energy & Mat Engn, Canberra, ACT 2601, Australia
[2] Harbin Inst Technol, Sch Mech Engn & Automat, Shenzhen 518055, Peoples R China
[3] Shanghai Jiao Tong Univ, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China
来源
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID | 2019年 / 104卷
关键词
TBAB hydrate; Storage strategies; Cooling rate; Cooling capacity; N-BUTYLAMMONIUM BROMIDE; LATENT-HEAT STORAGE; ENERGY-STORAGE; TETRABUTYLAMMONIUM BROMIDE; FORMATION BEHAVIOR; PHASE-EQUILIBRIUM; PCM; HYDRATE; TBAB; TANK;
D O I
10.1016/j.ijrefrig.2019.05.038
中图分类号
O414.1 [热力学];
学科分类号
摘要
With the increasing use of thermal energy storage in space cooling systems, various phase change materials have been explored. Semi-clathrate hydrates of quaternary ammonium salts can form under atmosphere pressure at applicable temperature ranges of air conditioning systems, among which tetrabutylammonium bromide (TBAB) hydrate has aroused most intensive interests in the past decade. This paper presents an experimental study to modify the phase equilibrium point of a novel TBAB hydrate based cold storage material, and investigates the material's performance in an emulate cold storage air conditioning system at various operation modes. Single charging and discharging operations, tank charging with chiller delivering load, and tank discharging with chiller delivering load operations with or without using bypass, are implemented to achieve full-storage and partial-storage strategies. The temperature distribution, charging and discharging rate and capacity are studied as key indexes to evaluate the cold storage performance. It was during a tank charging-chiller delivering load operation, using bypass is unfavourable for thermal storage effectiveness. During a tank discharging-chiller delivering load operation, chiller starting at a later stage with bypass is favourable for the system efficiency. (C) 2019 Elsevier Ltd and IIR. All rights reserved.
引用
收藏
页码:259 / 269
页数:11
相关论文
共 37 条
  • [1] Heat transfer characteristics of a hybrid thermal energy storage tank with Phase Change Materials (PCMs) during indirect charging using isothermal coil heat exchanger
    Abdelsalam, M. Y.
    Sarafraz, P.
    Cotton, J. S.
    Lightstone, M. F.
    [J]. SOLAR ENERGY, 2017, 157 : 462 - 476
  • [2] [Anonymous], 1995, TOM EN TOD CIT COUNT
  • [3] Measurement of latent heat of tetra-n-butylammonium bromide (TBAB) hydrate
    Asaoka, Tatsunori
    Kumano, Hiroyuki
    Serita, Maki
    [J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2013, 36 (03): : 992 - 997
  • [4] Efficient simulation strategy for PCM-based cold-energy storage systems
    Bejarano, Guillermo
    Vargas, Manuel
    Ortega, Manuel G.
    Castano, Fernando
    Normey-Rico, Julio E.
    [J]. APPLIED THERMAL ENGINEERING, 2018, 139 : 419 - 431
  • [5] Novel scheme for a PCM-based cold energy storage system. Design, modelling, and simulation
    Bejarano, Guillermo
    Suffo, Jose J.
    Vargas, Manuel
    Ortega, Manuel G.
    [J]. APPLIED THERMAL ENGINEERING, 2018, 132 : 256 - 274
  • [6] Effective tube-in-tank PCM thermal storage for CSP applications, Part 1: Impact of tube configuration on discharging effectiveness
    Belusko, M.
    Tay, N. H. S.
    Liu, M.
    Bruno, F.
    [J]. SOLAR ENERGY, 2016, 139 : 733 - 743
  • [7] Thermal performance analysis of a cascaded cold storage unit using multiple PCMs
    Cheng, Xiwen
    Zhai, Xiaoqiang
    [J]. ENERGY, 2018, 143 : 448 - 457
  • [8] Improving system performance of a personal conditioning system integrated with thermal storage
    Dhumane, Rohit
    Qiao, Yiyuan
    Ling, Jiazhen
    Muehlbauer, Jan
    Aute, Vikrant
    Hwang, Yunho
    Radermacher, Reinhard
    [J]. APPLIED THERMAL ENGINEERING, 2019, 147 : 40 - 51
  • [9] Dincer I, 2011, THERMAL ENERGY STORA, P142
  • [10] Numerical analysis for maximizing effective energy storage capacity of thermal energy storage systems by enhancing heat transfer in PCM
    Fang, Yuhang
    Niu, Jianlei
    Deng, Shiming
    [J]. ENERGY AND BUILDINGS, 2018, 160 : 10 - 18