Numerical Analysis of the Energy Improvement of Plastering Mortars with Phase Change Materials

被引：13

作者：

Sa, A. Vaz ^{[1
]}

Almeida, R. M. S. F. ^{[2
,3
]}

Sousa, H. ^{[1
]}

Delgado, J. M. P. Q. ^{[3
]}

机构：

[1] Univ Porto, Fac Engn, Construct Technol Qual & Management GEQUALTEC, P-4200465 Oporto, Portugal

[2] Polytech Inst Viseu, Sch Technol & Management, P-3504510 Viseu, Portugal

[3] Univ Porto, Fac Engn, Dept Civil Engn, Lab Bldg Phys LFC, P-4200465 Oporto, Portugal

来源：

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING | 2014年 / 2014卷

关键词：

PCM; STORAGE; ROOM; WALL;

D O I：

10.1155/2014/582536

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Building components with incorporated phase change materials (PCMs) meant to increase heat storage capacity and enable stabilization of interior buildings surface temperatures, whereby influencing the thermal comfort sensation and the stabilization of the interior ambient temperatures. The potential of advanced simulation tools to evaluate and optimize the usage of PCM in the control of indoor temperature, allowing for an improvement in the comfort conditions and/or in the cooling energy demand, was explored. This paper presents a numerical and sensitivity analysis of the enthalpy and melting temperature effect on the inside building comfort sensation potential of the plastering PCM.

引用

页数：12

共 27 条

[1] Applications of Nanomaterials in Construction with an Approach to Energy Issue
Ahadi, Parisa
[J]. ADVANCES IN BUILDING MATERIALS, PTS 1-3, 2011, 261-263 : 509 - 514
[2] [Anonymous], 2012, ENERGYPLUS ENG REF R
[3] [Anonymous], 2007, 140 ASHRAE ANSI
[4] [Anonymous], 1991, ISO 8301 Thermal Insulation-Determination of Steady-State Thermal Resistance and Related Properties-Heat Flow Meter Apparatus
[5] [Anonymous], 2005, Ergonomics of the thermal environment _ Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
[6] Investigation of the thermal performance of a passive solar test-room with wall latent heat storage
Athienitis, AK
Liu, C
Hawes, D
Banu, D
Feldman, D
[J]. BUILDING AND ENVIRONMENT, 1997, 32 (05) : 405 - 410
[7] BASF BASF The Chemical Company GmbH, 2010, PHAS CHANG MAT
[8] Use of microencapsulated PCM in concrete walls for energy savings
Cabeza, Luisa F.
Castellon, Cecilia
Nogues, Miquel
Medrano, Marc
Leppers, Ron
Zubillaga, Oihana
[J]. ENERGY AND BUILDINGS, 2007, 39 (02) : 113 - 119
[9] Experimental study of using PCM in brick constructive solutions for passive cooling
Castell, A.
Martorell, I.
Medrano, M.
Perez, G.
Cabeza, L. F.
[J]. ENERGY AND BUILDINGS, 2010, 42 (04) : 534 - 540
[10] CEN, 2006, 1015 CEN, VEN1015

← 1 2 3 →