Effect of Welding Parameters on the Microstructure and Mechanical Properties of Friction-Welded Joints of 100Cr6 Steel

被引：9

作者：

Demouche, M. ^{[1
]}

Ouakdi, E. H. ^{[1
]}

Louahdi, R. ^{[1
]}

机构：

[1] FERHAT Abbas Univ, Lab Phys & Mech Metall Mat, Opt & Precis Mech Inst, Setif, Algeria

来源：

IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING | 2019年 / 16卷 / 03期

关键词：

Rotary friction welding; 100; Cr6; steel; Heat Affected Zone; mechanical properties; microstructure;

D O I：

10.22068/ijmse.16.2.24

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, high-carbon, chromium alloy steel (100Cr6) having the initial spheroidized microstructure was welded using the rotary friction welding method. The effects of process parameters such as friction time and friction force were experimentally investigated. The friction welded joints were produced of two 100Cr6 steel rods. In order to examine the microstructure and mechanical properties of the friction welded 100cr6 steel joints, tensile and hardness tests were conducted. The microstructure of the weld zone was examined by optical microscopy. It was found that after cooling, martensitic structure is obtained at the core and periphery of the weld joint. It was found that the tensile strength of friction welded samples is increased with increasing time and force of friction up to a certain level and then decreases again. Hardness measurements show a higher hardness at the center of the weld joint in comparison with its periphery.

引用

页码：24 / 31

页数：8

共 18 条

[11] Joining with friction welding of high-speed steel and medium-carbon steel [J].

Sahin, M .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 168 (02) :202-210

[12] Characterization of mechanical properties in AISI 1040 parts welded by friction welding [J].

Sahin, Mumin ;

Akata, H. Erol ;

Gulmez, Turgut .

MATERIALS CHARACTERIZATION, 2007, 58 (10) :1033-1038

[13] Analysis of friction welding parameters on the mechanical metallurgical and chemical properties of AISI 1035 steel joints [J].

Selvamani, S. T. ;

Palanikumar, K. ;

Umanath, K. ;

Jayaperumal, D. .

MATERIALS & DESIGN, 2015, 65 :652-661

[14] Optimizing the friction welding parameters to attain maximum tensile strength in AISI 1035 grade carbon steel rods [J].

Selvamani, S. T. ;

Palanikumar, K. .

MEASUREMENT, 2014, 53 :10-21

[15] Evolution of microstructure and mechanical properties of Fe-24Ni-0.3C TRIP steel during friction stir processing [J].

Tehrani-Moghadam, H. G. ;

Jafarian, H. R. ;

Salehi, M. T. ;

Eivani, A. R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 718 :335-344

[16] Determination of optimum welding parameters in connecting high alloyed X53CrMnNiN219 and X45CrSi93 steels by friction welding [J].

Uzkut M. ;

Ünlü B.S. ;

Akdağ M. .

Bulletin of Materials Science, 2011, 34 (4) :815-823

[17] Effect of friction welding parameters on the tensile strength and microstructural properties of dissimilar AISI 1020-ASTM A536 joints [J].

Winiczenko, Radoslaw .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 84 (5-8) :941-955

[18] On the Characteristics of Friction Stir Welding Lap Joint of Magnesium and Aluminum [J].

Zamani, M. H. ;

Divandari, M. ;

Tamizifar, M. .

IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2018, 15 (01) :64-77

← 1 2 →