Metallurgical Approach Towards Explaining Optimized EDM Process Parameters for Better Surface Integrity of AISI D2 Tool Steel

被引：10

作者：

Nayak, Debasis ^{[1
]}

Sahu, Shiba Narayan ^{[2
]}

Mula, Suhrit ^{[3
]}

机构：

[1] Indian Inst Technol Kharagpur, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India

[2] Gandhi Inst Educ & Technol, Dept Mech Engn, Khurdha 752060, Odisha, India

[3] Indian Inst Technol Roorkee, Dept Met & Mat Engn, Roorkee 247667, Uttar Pradesh, India

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2017年 / 70卷 / 05期

关键词：

EDM; Taguchi design; Surface integrity; Residual stress; XRD; Genetic algorithm; DISCHARGE MACHINING EDM; RESIDUAL-STRESSES;

D O I：

10.1007/s12666-016-0910-z

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Many attempts have been made to model and optimize performance parameters of Electrical Discharge Machining (EDM) process. In this investigation, the experimental design includes L9 orthogonal array based on the Taguchi methodology. The corresponding effect of input current, duty cycle and spark on time, on surface integrity, has been studied on AISI D2 tool steel. The residual stress measurement is done using X-ray diffraction method. The obtained output results regarding material removal rate, surface roughness, crack density, and residual stress have been modeled and optimized by regression equation and Genetic algorithm respectively. In this investigation, a metallurgical approach has been introduced towards the explanation of the resulted optimized response parameters.

引用

页码：1183 / 1191

页数：9

共 50 条

[1] Metallurgical Approach Towards Explaining Optimized EDM Process Parameters for Better Surface Integrity of AISI D2 Tool Steel
Debasis Nayak
Shiba Narayan Sahu
Suhrit Mula
Transactions of the Indian Institute of Metals, 2017, 70 : 1183 - 1191
[2] The effect of grinding parameters and gas nitriding depth on the grindability and surface integrity of AISI D2 tool steel
Brahim Ben Fathallah
Chams Eddine Dakhli
Mohamed Ali Terres
The International Journal of Advanced Manufacturing Technology, 2019, 104 : 1449 - 1459
[3] The effect of grinding parameters and gas nitriding depth on the grindability and surface integrity of AISI D2 tool steel
Ben Fathallah, Brahim
Dakhli, Chams Eddine
Terres, Mohamed Ali
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (1-4) : 1449 - 1459
[4] Surface Integrity in Abrasive Flow Machining of Hardened Tool Steel AISI D2
Kenda, J.
Pusavec, F.
Kermouche, G.
Kopac, J.
1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
[5] Surface Integrity in the Grinding of Hardened AISI D2 Steel
Zhang, Tao
Wang, Qianting
Wang, Ningchang
Yan, Lan
Jiang, Feng
Zhang, Enlai
Zhou, Wuhui
Gao, Hao
Wang, Yong
MATERIALS, 2025, 18 (04)
[6] The significant contribution of temperature to the improvement in characteristics and integrity of ground surfaces of AISI D2 tool steel
Ben Fathallah, Brahim
Aouadi, Badreddine
Rawen, Mohamed
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2025, 47 (04)
[7] Surface Integrity in Hot Machining of AISI D2 Hardened Steel
Lojis, M. A.
Amin, A. K. M. Nurul
Karim, A. N. M.
ADVANCES IN MATERIALS PROCESSING X, 2012, 500 : 44 - +
[8] Effect of Tool Rotation on MRR, TWR, and Surface Integrity of AISI-D3 Steel using the Rotary EDM Process
Dwivedi, Anand Prakash
Choudhury, Sounak Kumar
MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (14) : 1844 - 1852
[9] Comparison between EDM and grinding machining on fatigue behaviour of AISI D2 tool steel
de Jesus, Abilio M. P.
Ramos, Gisela F. S.
Gomes, Vitor M. G.
Marques, Maria J.
de Figueiredo, Miguel A. V.
Marafona, Jose D. R.
INTERNATIONAL JOURNAL OF FATIGUE, 2020, 139
[10] Investigation of the surface integrity induced by abrasive flow machining on AISI D2 hardened steel
Kenda, J.
Kermouche, G.
Dumont, F.
Rech, J.
Kopac, J.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2013, 46 (01) : 19 - 31

← 1 2 3 4 5 →