A rheology model of high damping rubber bearings for seismic analysis: Identification of nonlinear viscosity

被引:90
作者
Bhuiyan, A. R. [1 ]
Okui, Y. [1 ]
Mitamura, H. [2 ]
Imai, T. [3 ]
机构
[1] Saitama Univ, Dept Environm Sci & Civil Engn, Sakura Ku, Saitama 3388570, Japan
[2] PWRI, Civil Engn Res Inst Cold Reg, Toyohira Ku, Sapporo, Hokkaido 0628602, Japan
[3] Rubber Bearing Assoc, Minato Ku, Tokyo 1070051, Japan
关键词
High damping rubber bearing; Rheology model; Nonlinear viscosity; Overstress; Loading and unloading; Seismic response; TIME-DEPENDENT BEHAVIOR; NUMERICAL VERIFICATION; CONSTITUTIVE MODEL; LARGE DEFORMATIONS; ELASTOMERS; VISCOELASTICITY; COMPRESSION;
D O I
10.1016/j.ijsolstr.2009.01.005
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The mechanical behavior of high damping rubber bearings (HDRBs) is investigated under horizontal cyclic shear deformation with a constant vertical compressive load. On the basis of experimental observations, an elasto-viscoplastic rheology model of HDRBs for seismic analysis is developed. In this model, the Maxwell model is extended by adding a nonlinear elastic spring and an elasto-plastic model (spring-slider) in parallel. In order to identify constitutive relations of each element in the rheology model, an experimental scheme comprised of three types of tests, namely a cyclic shear (CS) test, a multi-step relaxation (MSR) test, and a simple relaxation (SR) test, are carried out at room temperature. HDRB specimens with the standard ISO geometry and three different high damping rubber materials are employed in these tests. A nonlinear viscosity law of the dashpot in the Maxwell model is deduced from the experimental scheme, and incorporated into the rheology model to reproduce the nonlinear rate dependent behavior of HDRBs. Finally, numerical simulation results for sinusoicial loading are presented to illustrate capability of the proposed theology model in reproducing the mechanical behavior of HDRBs. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1778 / 1792
页数:15
相关论文
共 34 条