Influence of carbonate reservoir mineral heterogeneities on contact angle measurements

被引:17
作者
Ferrari, Jean Vicente [1 ,2 ]
de Oliveira Silveira, Bruno Marco [1 ]
Arismendi-Florez, Jhonatan Jair [2 ]
Fagundes, Thais Bortotti [2 ]
da Trindade Silva, Mayara Antunes [1 ]
Skinner, Rodrigo [3 ]
Ulsen, Carina [1 ,2 ]
Carneiro, Cleyton de Carvalho [1 ]
机构
[1] Univ Sao Paulo, Escola Politecn, Integrated Technol Rock & Fluid Anal, Santos, SP, Brazil
[2] Univ Sao Paulo, Escola Politecn, Lab Caracteriz Tecnol, Rio De Janeiro, RJ, Brazil
[3] Petrobras SA, Ctr Pesquisas Leopoldo Amer Miguez Mello, Rio De Janeiro, RJ, Brazil
关键词
Carbonate; SEM-MLA mineralogy; Contact angle; Wettability; Pre-sal reservoir;
D O I
10.1016/j.petrol.2020.108313
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The wettability of reservoir rocks is one of the critical, advanced petrophysical parameters affecting oil production, during the field production life, from primary to enhanced recovery projects. This paper addresses the effect of mineral heterogeneities on wettability behaviour by measuring the contact angle (CA) on carbonate rock core samples from a Brazilian pre-salt reservoir. Mineralogical composition and mineral maps of samples extracted from reservoir plugs were characterised by X-ray based image analysis (scanning electron microscope coupled with automated mineral liberation analysis - SEM-MLA). The results indicated that around 99% of the samples were composed of calcite, dolomite, and quartz with completely different mineral distribution and texture. Also, the attained mineral maps directed the obtention of samples containing different mineral contents in which CA measurements were carried out by using the sessile drop method. CA experiments were run at a temperature of 60 degrees C and a pressure of 4000 psi with no-aged and aged samples in dead oil. Self-organised maps, generated by machine learning, were used to analyse the relationships between the variables. The results indicate that the predominant mineral constituents and their distribution influence the contact angle values and emphasise the importance of using reservoir core samples and their closest analogues when approaching rock/ fluid interaction studies. Despite the samples with higher quartz content showing a greater water-phase affinity than carbonate ones, when both phases are inter-grown, wettability was changed to neutral and oil-wet. In this way, the mineral proportions and texture play a key role in the measured CA. Dolomite contributes to increasing the oil-wet tendency of the rock samples. Mineral maps are not currently applied in wettability studies but demonstrate that it can be a valuable tool for more reproducible measurements and a better understanding of the reservoir.
引用
收藏
页数:9
相关论文
共 50 条
  • [31] Direct measurement of the contact angle of water droplet on quartz in a reservoir rock with atomic force microscopy
    Deng, Yajun
    Xu, Lei
    Lu, Hailong
    Wang, Hao
    Shi, Yongmin
    CHEMICAL ENGINEERING SCIENCE, 2018, 177 : 445 - 454
  • [32] Contact angle measurements on two (wood and stone) non-ideal surfaces
    Rodríguez-Valverde, MA
    Cabrerizo-Vílchez, MA
    Rosales-López, P
    Páez-Dueñas, A
    Hidalgo-Alvarez, R
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2002, 206 (1-3) : 485 - 495
  • [33] A new insight into dynamic contact angle measurements: Implementation of smooth splines method
    Asadi, Mohammad Bagher
    Aboud, Damon G. K.
    Wood, Michael J.
    Zeppetelli, Gianluca
    Kietzig, Anne-Marie
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2022, 655
  • [34] Automation of the axisymmetric drop shape analysis-diameter for contact angle measurements
    Alvarez, JM
    Amirfazli, A
    Neumann, AW
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 1999, 156 (1-3) : 163 - 176
  • [35] Some remarks on the solid surface tension determination from contact angle measurements
    Zdziennicka, Anna
    Szymczyk, Katarzyna
    Krawczyk, Joanna
    Janczuk, Bronislaw
    APPLIED SURFACE SCIENCE, 2017, 405 : 88 - 101
  • [36] Contact angle measurements: From existing methods to an open-source tool
    Akbari, Raziyeh
    Antonini, Carlo
    ADVANCES IN COLLOID AND INTERFACE SCIENCE, 2021, 294
  • [37] Study on the Surface Energy of Graphene by Contact Angle Measurements
    Kozbial, Andrew
    Li, Zhiting
    Conaway, Caitlyn
    McGinley, Rebecca
    Dhingra, Shonali
    Vahdat, Vahid
    Zhou, Feng
    D'Urso, Brian
    Liu, Haitao
    Li, Lei
    LANGMUIR, 2014, 30 (28) : 8598 - 8606
  • [38] Contact angle measurements and criteria for surface energetic interpretation
    Kwok, DY
    Neumann, AW
    CONTACT ANGLE, WETTABILITY AND ADHESION, VOL 3, 2003, : 117 - 159
  • [39] Dehydration of glass surfaces studied by contact angle measurements
    Englander, T
    Wiegel, D
    Naji, L
    Arnold, K
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1996, 179 (02) : 635 - 636
  • [40] Contact angle measurements on polysilicon for surface micromachining applications
    Bhattacharya, E
    Babu, UV
    Rani, LHA
    Pradeep, P
    Rao, PRS
    Bhat, KN
    SMART MATERIALS, STRUCTURES, AND SYSTEM, PTS 1 AND 2, 2003, 5062 : 367 - 372