Influence of carbonate reservoir mineral heterogeneities on contact angle measurements

被引:17
作者
Ferrari, Jean Vicente [1 ,2 ]
de Oliveira Silveira, Bruno Marco [1 ]
Arismendi-Florez, Jhonatan Jair [2 ]
Fagundes, Thais Bortotti [2 ]
da Trindade Silva, Mayara Antunes [1 ]
Skinner, Rodrigo [3 ]
Ulsen, Carina [1 ,2 ]
Carneiro, Cleyton de Carvalho [1 ]
机构
[1] Univ Sao Paulo, Escola Politecn, Integrated Technol Rock & Fluid Anal, Santos, SP, Brazil
[2] Univ Sao Paulo, Escola Politecn, Lab Caracteriz Tecnol, Rio De Janeiro, RJ, Brazil
[3] Petrobras SA, Ctr Pesquisas Leopoldo Amer Miguez Mello, Rio De Janeiro, RJ, Brazil
关键词
Carbonate; SEM-MLA mineralogy; Contact angle; Wettability; Pre-sal reservoir;
D O I
10.1016/j.petrol.2020.108313
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The wettability of reservoir rocks is one of the critical, advanced petrophysical parameters affecting oil production, during the field production life, from primary to enhanced recovery projects. This paper addresses the effect of mineral heterogeneities on wettability behaviour by measuring the contact angle (CA) on carbonate rock core samples from a Brazilian pre-salt reservoir. Mineralogical composition and mineral maps of samples extracted from reservoir plugs were characterised by X-ray based image analysis (scanning electron microscope coupled with automated mineral liberation analysis - SEM-MLA). The results indicated that around 99% of the samples were composed of calcite, dolomite, and quartz with completely different mineral distribution and texture. Also, the attained mineral maps directed the obtention of samples containing different mineral contents in which CA measurements were carried out by using the sessile drop method. CA experiments were run at a temperature of 60 degrees C and a pressure of 4000 psi with no-aged and aged samples in dead oil. Self-organised maps, generated by machine learning, were used to analyse the relationships between the variables. The results indicate that the predominant mineral constituents and their distribution influence the contact angle values and emphasise the importance of using reservoir core samples and their closest analogues when approaching rock/ fluid interaction studies. Despite the samples with higher quartz content showing a greater water-phase affinity than carbonate ones, when both phases are inter-grown, wettability was changed to neutral and oil-wet. In this way, the mineral proportions and texture play a key role in the measured CA. Dolomite contributes to increasing the oil-wet tendency of the rock samples. Mineral maps are not currently applied in wettability studies but demonstrate that it can be a valuable tool for more reproducible measurements and a better understanding of the reservoir.
引用
收藏
页数:9
相关论文
共 50 条
  • [11] An Essay on Contact Angle Measurements
    Strobel, Mark
    Lyons, Christopher S.
    PLASMA PROCESSES AND POLYMERS, 2011, 8 (01) : 8 - 13
  • [12] The use of contact angle measurements to estimate the adhesion propensity of calcium carbonate to solid substrates in water
    Bargir, Sameer
    Dunn, Steve
    Jefferson, Bruce
    Macadam, Jitka
    Parsons, Simon
    APPLIED SURFACE SCIENCE, 2009, 255 (09) : 4873 - 4879
  • [13] Contact angle measurements and contact angle interpretation: Relevance to the thermodynamics of adhesion
    Kwok, DY
    Neumann, AW
    ACID-BASE INTERACTIONS: RELEVANCE TO ADHESION SCIENCE AND TECHNOLOGY, VOL 2, 2000, : 91 - 166
  • [14] The effect of dynamic wetting pressure on contact angle measurements
    Ahmed, Abrar
    Sanedrin, Raymond
    Willers, Thomas
    Waghmare, Prashant R.
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2022, 608 : 1086 - 1093
  • [15] Contact Angle Measurement for Oil Mineral Water System on a Micro Scale
    Kunieda, Makoto
    Ueda, Akira
    Matsuoka, Toshifumi
    Okatsu, Komei
    Fukunaka, Yasuhiro
    JOURNAL OF GEOGRAPHY-CHIGAKU ZASSHI, 2012, 121 (01) : 31 - 38
  • [16] Contact angle measurements of pure refrigerants
    Lu, Xingbin
    Liu, Jinping
    Xu, Xiongwen
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 102 : 877 - 883
  • [17] Contact angle measurements on cyclopentane hydrates
    Thomas, Fanny
    Dalmazzone, Didier
    Morris, Jeffrey F.
    CHEMICAL ENGINEERING SCIENCE, 2021, 229
  • [18] Current understanding of shale wettability: A review on contact angle measurements
    Siddiqui, Mohammed Abdul Qadeer
    Ali, Saif
    Fei, Haoxiang
    Roshan, Hamid
    EARTH-SCIENCE REVIEWS, 2018, 181 : 1 - 11
  • [19] Contact angle measurements in the refrigerant falling film evaporation process
    Li, Guoli
    Liu, Jinping
    Xu, Xiongwen
    Lu, Xingbin
    Chen, Jianxun
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2020, 112 : 262 - 269
  • [20] On the influence of sodium chloride concentration on equilibrium contact angle
    Sghaier, N.
    Prat, M.
    Ben Nasrallah, S.
    CHEMICAL ENGINEERING JOURNAL, 2006, 122 (1-2) : 47 - 53