Advances on indirect methods to evaluate tool wear for Radiata pine solid wood molding

被引：16

作者：

Aguilera, A. ^{[1
]}

Meausoone, P. J. ^{[2
]}

Rolleri, A. ^{[1
]}

Barros, J. L. ^{[3
]}

Burgos, F. ^{[1
]}

Aguilar, C. ^{[4
]}

机构：

[1] Univ Austral Chile, Forest Prod Lab, Valdivia, Chile

[2] Lorraine Univ, Lab Etud & Rech Mat Bois, LERMAB, Epinal, France

[3] Univ Austral Chile, Inst Acoust, Valdivia, Chile

[4] Univ Tecn Federico Santa Maria, Dept Met Engn & Mat, Valparaiso, Chile

来源：

WEAR | 2016年 / 350-351卷

关键词：

Radiata pine; Sound pressure; Electrical current; Tool wear; Molding; SURFACE-ROUGHNESS; QUALITY; SOUND;

D O I：

10.1016/j.wear.2015.12.011

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The final quality of solid wood molding depends on several factors, where the choice of cutting conditions and consequently the tool performance are key points when processing this type of material because tool wear affects physical-chemical and thermodynamic behavior of the surface submitted to coating. One of the main problems at the production line is to achieve an adequate monitoring system of the cutting process to prevent and detect operational problems or loss of productivity. The objective of this research is to evaluate results from two different control process methods, such as sound pressure and electrical current measurement submitted during different cutting conditions and to determine the cutting distance increase, as innovative methods to estimate tool wear when appearance grade products are being produced. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：27 / 34

页数：8

共 29 条

[1] Aguilera A., 2013, Pro Ligno, V9, P398
[2] Machining qualification of solid wood of Fagus silvatica L. and Picea excelsa L.:: Cutting forces, power requirements and surface roughness
Aguilera, A
Martin, P
[J]. HOLZ ALS ROH-UND WERKSTOFF, 2001, 59 (06) : 483 - 488
[3] Aguilera A., 2011, WOOD MACHINING, P159
[4] Aguilera A., 1999, P 14 INT WOOD MACH S, P19
[5] Aguilera A, 2014, RES DEV WOOD ENG TEC, V1, P320, DOI DOI 10.4018/978-1-4666-4554-7.CH009
[6] Aguilera A., 2012, WOOD WOOD PRODUCTS, P57
[7] JOINTING KNIVES AND TOOL WEAR EFFECT IN THE SURFACE QUALITY OF RADIATA PINE MOLDINGS
Aguilera, Alfredo
Fernandez, Christopher
[J]. MADERAS-CIENCIA Y TECNOLOGIA, 2012, 14 (02): : 175 - 184
[8] Surface roughness assessment on medium density fibreboard rip sawing using acoustic signals
Aguilera, Alfredo
Luis Barros, Jose
[J]. EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2012, 70 (1-3) : 369 - 372
[9] Astakhov V.P., 2008, MACHINING FUNDAMENTA, P29, DOI 10.1007/978-1-84800-213-5
[10] BANSHOYA K, 1994, MOKUZAI GAKKAISHI, V40, P434

← 1 2 3 →