Estimation of Mechanical Properties of Stainless Steel AISI 410 by Small-Punch Testing (Erickson Test)

被引:1
作者
Hassan, A-P [1 ]
机构
[1] Univ Semnan, Dept Mat Engn, Semnan, Iran
关键词
steels; mechanical properties; small-punch test; FRACTURE-TOUGHNESS; SPECIMEN;
D O I
10.1007/s11041-014-9724-y
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The small-punch testing (SPT) method is used for determining the mechanical properties of AISI 410 (0.14% C, 12% Cr) stainless steel. A thin disc-shaped specimen with known mechanical properties is pressed with a small ball until the appearance of cracks in the former. The load - displacement curves are recorded. Computation of the yield strength and fracture energy by the curve obtained and by known formulas shows good convergence with the characteristics obtained by standard testing.
引用
收藏
页码:165 / 168
页数:4
相关论文
共 19 条
[1]   SMALL PUNCH TEST EVALUATION OF INTERGRANULAR EMBRITTLEMENT OF AN ALLOY-STEEL [J].
BAIK, JM ;
KAMEDA, J ;
BUCK, O .
SCRIPTA METALLURGICA, 1983, 17 (12) :1443-1447
[2]   A study concerning material fracture toughness and some small punch test data for low alloy steels [J].
Bulloch, JH .
ENGINEERING FAILURE ANALYSIS, 2004, 11 (04) :635-653
[3]   Derivation of ductile fracture resistance by use of small punch specimens [J].
Chang, Yoon-Suk ;
Kim, Jong-Min ;
Choi, Jae-Boong ;
Kim, Young-Jin ;
Kim, Min-Chul ;
Lee, Bong-Sang .
ENGINEERING FRACTURE MECHANICS, 2008, 75 (11) :3413-3427
[4]   Small punch test for determining a flow stress by using a hybrid inverse procedure [J].
Cheon, Jin-Sik ;
Joo, Cheol-Hong .
COMPUTATIONAL MATERIALS SCIENCE, 2008, 43 (04) :744-751
[5]   Comparison of conventional and small punch creep tests of mechanically alloyed Al-C-O alloys [J].
Dobes, F. ;
Milicka, K. .
MATERIALS CHARACTERIZATION, 2008, 59 (07) :961-964
[6]  
Foulds J., 2002, ASTM STP
[7]   Evaluation of mechanical properties using shear-punch testing [J].
Guduru, RK ;
Darling, KA ;
Kishore, R ;
Scattergood, RO ;
Koch, CC ;
Murty, KL .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 395 (1-2) :307-314
[8]   SMALL-PUNCH AND TEM-DISK TESTING TECHNIQUES AND THEIR APPLICATION TO CHARACTERIZATION OF RADIATION-DAMAGE [J].
KAMEDA, J ;
MAO, X .
JOURNAL OF MATERIALS SCIENCE, 1992, 27 (04) :983-989
[9]  
Komazai S, 2000, J TEST EVAL, V28, P249, DOI 10.1520/JTE12102J
[10]   REVIEW OF SMALL SPECIMEN TEST TECHNIQUES FOR IRRADIATION TESTING [J].
LUCAS, GE .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (05) :1105-1119