DETERMINATION OF EPOXY RESINS' MECHANICAL PROPERTIES BY EXPERIMENTAL-COMPUTATIONAL PROCEDURES IN TENSION

被引：0

作者：

Tsiafis, I. ^{[1
]}

Bouzakis, K-D. ^{[1
]}

Michailidis, N. ^{[1
]}

机构：

[1] Aristotle Univ Thessaloniki, Lab Machine Tools & Mfg Engn, Dept Mech Engn, GR-54006 Thessaloniki, Greece

来源：

JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION | 2009年 / 15卷 / 01期

关键词：

epoxy resins; mechanical properties; tensile strength; FEM simulation; COATINGS;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The use of epoxy resins in metal structures for adhesive reasons is getting wider., Epoxy resins possess enhanced mechanical, chemical and physical properties, i.e. increased shear and compression strength, resistance to solvents, as well as at high temperatures. Tensile tests were carried out with standard aluminium tension specimens glued with epoxy resins. The thickness of the glue and the acting cross-section area were variable. The specimens were cemented under constant temperature and humidity conditions. The experimental results were simulated with the aid of FEM-based procedures, while the stress-strain curves of the epoxy resins, as obtained by nanoindentations and corresponding FEM-supported algorithm, were taken into account. The obtained results allow the determination of the epoxy resins' strength versus its thickness and the occupying cross-section area.

引用

页码：18 / 24

页数：7

共 50 条

[41] Interfaces in reinforced epoxy resins: from molecular scale understanding towards mechanical properties [J].

Julian Konrad ;

Dirk Zahn .

Journal of Molecular Modeling, 2023, 29

[42] Application of epoxy resins in electronics and optoelectronics. Part I. Mechanical properties and thermal stability of epoxy resins used for encapsulation of electronic devices [J].

Mazela, W ;

Czub, P ;

Pielichowski, J .

POLIMERY, 2004, 49 (04) :233-239

[43] Computational and experimental studies on structure and mechanical properties of Mo-Al-N [J].

Klimashin, F. F. ;

Euchner, H. ;

Mayrhofer, P. H. .

ACTA MATERIALIA, 2016, 107 :273-278

[44] Experimental and optimization of mechanical properties of epoxy/nanosilica and hybrid epoxy/fiberglass/nanosilica composites [J].

Feli, Saeed ;

Jalilian, Maziar M. .

JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (28) :3891-3903

[45] EXPERIMENTAL STUDY OF LOW CYCLE FATIGUE PROPERTIES FOR EPOXY RESINS WITH DIBUTYL PHTHALATE (DBP) [J].

Wang, Zhi ;

Zhou, Jiajia ;

Song, Linjian ;

Li, Long .

ARCHIVES OF CIVIL ENGINEERING, 2018, 64 (02) :147-159

[46] Influence of catalyst content on the thermal and mechanical properties of epoxy resins initiated by a cationic latent thermal catalyst at elevated temperatures [J].

Park, SJ ;

Seo, MK .

MACROMOLECULAR MATERIALS AND ENGINEERING, 2003, 288 (11) :894-899

[47] Curing kinetics and mechanical properties of bio-based epoxy composites comprising lignin-bised epoxy resins [J].

Ferdosian, Fatemeh ;

Zhang, Yongsheng ;

Yuan, Zhongshun ;

Anderson, Mark ;

Xu, Chunbao .

EUROPEAN POLYMER JOURNAL, 2016, 82 :153-165

[48] Investigating mechanical properties of composites reinforced with jute/cotton natural fibers in hybridized epoxy/vinylester and epoxy/polyester resins [J].

Ahmad, Hammad ;

Abid, Muhammad Hamza ;

Gazo-Hanna, Eddie ;

Shah, Atta Ur Rehman ;

Ghumman, Imran Sajid Shahid ;

Arif, Saad ;

Naseem, Muhammad Shoaib ;

Zohaib, Hafiz Muhammad .

POLYMER COMPOSITES, 2025, 46 (10) :9400-9409

[49] The Nano-indentation Experimental Determination of the Mechanical Properties of Laminated Composite Quadrature Interface of Boron Fiber/Epoxy [J].

Zhang, Xiaoyan ;

Xing, Yongming ;

Lang, Fengchao ;

Jiang, Aifeng .

ADVANCED MATERIAL ENGINEERING (AME 2015), 2016, :413-421

[50] MECHANICAL PROPERTIES AND CURING KINETICS OF EPOXY RESINS CURED BY VARIOUS AMINO-TERMINATED POLYETHERS [J].

Zhao, Li-ying ;

Guan, Jian-guo ;

Ma, Hui-ru ;

Sun, Zhi-gang .

CHINESE JOURNAL OF POLYMER SCIENCE, 2010, 28 (06) :961-969

← 1 2 3 4 5 →