A study on the lap shear strength of a co-cured single lap joint

被引：31
|
作者：
Shin, KC [1 ]
Lee, JJ [1 ]
Lee, DG [1 ]
机构：
[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Yusong Gu, Taejon 305701, South Korea
来源：
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2000年 / 14卷 / 01期
关键词：
co-cured single lap joint; excess resin; lap shear strength; surface roughness; bond length; stacking sequence;
D O I：
10.1163/156856100742140
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
In this paper, the lap shear strength of a co-cured single lap joint subjected to a tensile load was investigated by experimental analysis. Go-cured joint specimens with several different bonding parameters such as bond length, surface roughness, and stacking sequence of the composite laminate were fabricated and tested. The dependence of the lap shear strength of the co-cured joint on the bonding parameters was investigated from the experimental results. The failure mechanism of the co-cured single lap joint was partially cohesive failure. The lap shear strength of the co-cured single lap joint was significantly affected by the bond length and the stacking sequence of the composite laminate. However. the effect of surface roughness on the lap shear strength of the co-cured single lap joint was not so significant.
引用
收藏
页码：123 / 139
页数：17
相关论文
共 50 条
  • [41] Strength analysis of single lap dissimilar materials bolted joint
    Sudev, L. J.
    Gajendra, S.
    3RD INTERNATIONAL CONFERENCE ON MATERIALS AND MANUFACTURING ENGINEERING 2018, 2018, 390
  • [42] Study on fatigue strength of laser welded lap joint
    Terasaki, T.
    Sobue, T.
    Kitamura, T.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2001, 19 (03): : 507 - 512
  • [43] Fatigue strength of a single lap joint SPR-bonded
    Di Franco, G.
    Fratini, L.
    Pasta, A.
    14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS, 2011, 1353 : 1265 - 1271
  • [44] Research on Tensile Strength of Wood Single Lap Gluing Joint
    Lu, Wei
    Hu, Yingcheng
    Shen, Jun
    Yao, Jia
    Li, Jin
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 351 - 354
  • [45] Analysis of the substrate nature on the strength of a single-lap joint
    A. Houari
    K. Madani
    M. El Ajrami
    M. Belhouari
    R. D. S. G. Campilho
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45
  • [46] Experimental investigation on shear strength of composite single-lap joints
    Chen, Lie
    Xiong, Jun-Jiang
    Cheng, Ze-Lin
    Cailiao Gongcheng/Journal of Materials Engineering, 2009, (11): : 31 - 35
  • [47] THE STRUCTURE OF THE STRENGTH OF RIVETED JOINTS DETERMINED IN THE LAP JOINT TENSILE SHEAR TEST
    Mucha, Jacek
    Witkowski, Waldemar
    ACTA MECHANICA ET AUTOMATICA, 2015, 9 (01) : 44 - 49
  • [48] Ductility effect on clinching joint strength in lap-shear configuration loading
    Kumar, Santosh
    Avinash, G.
    Vimal, E.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1667 - 1672
  • [49] The Impacts of Heat Treatment on Lap Joint Shear Strength of Black Pine Wood
    Aydemir, Deniz
    Gunduz, Gokhan
    Onat, Saadettin Murat
    JOURNAL OF ADHESION, 2010, 86 (09): : 904 - 912
  • [50] Joint strength optimization of single lap adhesive joints by surface patterning
    Hirulkar, N. S.
    Jaiswal, P. R.
    Papadakis, Loucas
    Reis, P. N. B.
    Ferreira, J. A. M.
    2017 INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTING, INSTRUMENTATION AND CONTROL TECHNOLOGIES (ICICICT), 2017, : 201 - 210
12345