CAD-Based Calibration and Shape Measurement with StereoDIC

被引：52

作者：

Beaubier, B. ^{[1
,2
]}

Dufour, J. -E. ^{[1
]}

Hild, F. ^{[1
]}

Roux, S. ^{[1
]}

Lavernhe, S. ^{[3
]}

Lavernhe-Taillard, K. ^{[1
]}

机构：

[1] UniverSud Paris, LMT Cachan, ENS Cachan, CNRS,UPMC,PRES, F-94235 Cachan, France

[2] Ctr Tech Velizy B, PSA Peugeot Citroen, F-78140 Velizy Villacoublay, France

[3] Univ Paris 11, LURPA, ENS Cachan, PRES UniverSud, F-94235 Cachan, France

来源：

EXPERIMENTAL MECHANICS | 2014年 / 54卷 / 03期

关键词：

Calibration; DIC; Freeform surfaces; Photogrammetry; Stereocorrelation; 3-DIMENSIONAL IMAGE CORRELATION; ACCURATE MEASUREMENT; CAMERA;

D O I：

10.1007/s11340-013-9794-6

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new calibration procedure is proposed for a stereovision setup. It uses the object of interest as the calibration target, provided the observed surface has a known definition (e.g., its CAD model). In a first step, the transformation matrices needed for the calibration of the setup are determined assuming that the object conforms to its CAD model. Then the 3D shape of the surface of interest is evaluated by deforming the a priori given freeform surface. These two steps are performed via an integrated approach to stereoDIC. The measured 3D shape of a machined B,zier patch is validated against data obtained by a coordinate measuring machine. The feasibility of the calibration method's application to large surfaces is shown with the analysis of a 2-m(2) automotive roof panel.

引用

页码：329 / 341

页数：13

共 37 条

[31] Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches [J].

Roux, Stephane ;

Hild, Francois .

INTERNATIONAL JOURNAL OF FRACTURE, 2006, 140 (1-4) :141-157

[32] A comparative review of camera calibrating methods with accuracy evaluation [J].

Salvi, J ;

Armangué, X ;

Batlle, J .

PATTERN RECOGNITION, 2002, 35 (07) :1617-1635

[33]

Seitz SM, 2006, 2006 IEEE COMPUTER S, P519, DOI 10.1109/CVPR.2006.19

[34] Scanning electron microscopy for quantitative small and large deformation measurements - part II: Experimental validation for magnifications from 200 to 10,000 [J].

Sutton, M. A. ;

Li, N. ;

Garcia, D. ;

Cornille, N. ;

Orteu, J. J. ;

McNeill, S. R. ;

Schreier, H. W. ;

Li, X. ;

Reynolds, A. P. .

EXPERIMENTAL MECHANICS, 2007, 47 (06) :789-804

[35] CAMERA CALIBRATION WITH DISTORTION MODELS AND ACCURACY EVALUATION [J].

WENG, JY ;

COHEN, P ;

HERNIOU, M .

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE, 1992, 14 (10) :965-980

[36]

Yoneyama S, 2006, OPT ENG, V45, P02360

[37] A flexible new technique for camera calibration [J].

Zhang, ZY .

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE, 2000, 22 (11) :1330-1334

← 1 2 3 4 →